Setup Checklist - Paul C. Buff Cyber Sense Quick Start Manual

SETUP CHECKLIST

All of the lights in your setup are positioned where you want them, on appropriate light stands
and with your choice of accessories in place. Each light is powered ON.
Each light in your setup has its own dedicated CyberSync™ transceiver or receiver.
The CyberSync™ Trigger Transmitter (CST2) is installed on the camera hot shoe.
The CyberSense™ remote, transmitter on camera, and all transceivers / receivers connected to
flash units are set to the same frequency. Additionally, make sure the transceivers / receivers are
set to seperate channels.