Advertisement
The CyberSense can be used to control the output of both the flash and modeling lamp on up to four Paul C. Buff flash units.
REQUIRED EQUIPMENT
- CyberSync
Trigger Transmitter 2 (CST2)
TM
- AlienBees and White Lightnings flash units require CyberSync
- DigiBee and Einstein
TM
RADIO RANGE
Up to 300 ft. (when on a flat and level terrain with no obstructions)
RADIO OPERATING FREQUENCY
2.4GHz
SYNC VOLTAGE
<= 4VDC
SYNC DELAY
1/4000s
SYNC PORT
1/8" (3.5mm) mono jack
NOTE:
By default, the CyberSense enters low-power standby after 30 seconds of inactivity.
flash units require CyberSync
BATTERY TYPE
BATTERY LIFE
Alkaline:
NiMH*:
GENERAL SPECIFICATIONS
Plus Model Receivers (CSR+ or CSRB+)
TM
Tranceiver (CSXCV)
TM
2x AAA Alkaline or 2x NiMH. Do NOT mix-and-match.
25 - 30hrs. with the screen on at 50% brightness and under normal usage.
1 year in low-power standby mode.
12 - 15hrs. with the screen on at 50% brightness and under normal usage.
3 months in low-power standby mode. (At room temperature.
Self-discharge of NiMH batteries increases at higher temperatures).
*Battery life for NiMH is per charge.
Advertisement
