Poulan weed eater illustrated parts list (18 pages)
Summary of Contents for Poulan Pro 417183
Page 1
IMPORTANT MANUAL OPERATOR'S MANUAL MODEL: PBA195H42LT LAWN TRACTOR ALWAYS WEAR EYE PROTECTION DURING OPERATION Visit our website: www.poulan.com 417183 10.11.07 TH Do Not Throw Away 03076 WARNING: Read this Man u al and follow all Warnings and Safety Instructions. Fail ure to do so can re sult in serious in ju ry.
Safe Operation Practices for Ride-On Mowers DANGER: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. WARNING: In order to prevent ac ci - den tal starting when setting up, trans- port ing, ad just ing or making repairs, al ways dis con nect spark plug wire...
Page 3
Safe Operation Practices for Ride-On Mowers III. CHILDREN Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the ma chine and the mowing activity. Never assume that children will remain where you last saw them. •...
Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness. TOOLS REQUIRED FOR ASSEMBLY A socket wrench set will make assembly easier.
Page 7
INSTALL SEAT (See Fig. 2) Adjust seat before tightening adjustment knob. • Remove adjustment knob and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor. • Pivot seat upward and remove from the cardboard pack- ing.
TO DRIVE TRAC TOR OFF SKID (See Op- er a tion section for location and function of con trols) • Be sure all the above assembly steps have been com- pleted. • Check engine oil level and fill fuel tank with gasoline. •...
These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their mean- ing. REVERSE NEUTRAL REVERSE ENGINE ON ENGINE OFF OPERATION SYSTEM (ROS) LIGHTS ON BATTERY FUEL ATTACHMENT ATTACHMENT CLUTCH DISENGAGED CLUTCH ENGAGED FREE WHEEL (Automatic Models only) Failure to follow instructions...
KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments. Save this manual for future reference. LIGHT SWITCH THROTTLE/CHOKE CONTROL CLUTCH/BRAKE...
Page 11
The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye dam age. Always wear safety glass es or eye shields while operating your tractor or per form ing any adjustments or repairs. We rec om mend a wide vision safety mask over spectacles or stan dard safety glasses.
TO OPERATE MOWER (See Fig. 6) Your tractor is equipped with an operator presence sens- ing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equipment on rough, rolling terrain or hills.
TO TRANSPORT (See Figs. 4 and 8) When pushing or towing your tractor, be sure to disengage transmission by placing freewheel control in free wheel ing po si tion. Free wheel control is located at the rear drawbar of tractor. •...
• The attachments and ground drive can now be used. If the engine does not accept the load, restart the engine and allow it to warm up for one minute using the choke as described above. COLD WEATHER STARTING ( 50° F and below) •...
TRACTOR Always observe safety rules when per form ing any main- te nance. BRAKE OPERATION If tractor requires more than five (5) feet to stop at highest speed in high est gear on a level, dry concrete or paved surface, then brake must be checked and ad just ed. (See “TO ADJUST BRAKE”...
• Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.
• Unlock drain valve by pushing inward and turning coun ter clock wise. • To open, pull out on the drain valve. • After oil has drained completely, close and lock the drain valve by pushing inward and turning clockwise until the pin is in the locked position as shown.
SERVICE AND ADJUSTMENTS WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SER VICE OR AD JUST - MENTS: • Depress clutch/brake pedal fully and set parking brake. • Place motion control lever in neutral (N) position. • Place attachment clutch in “DISENGAGED” position. •...
SERVICE AND ADJUSTMENTS SIDE-TO-SIDE ADJUSTMENT (See Figs. 16 and 17) • Raise mower to its highest position. • At the midpoint of both sides of mower, measure height from bot tom edge of mower to ground. Distance “A” on both sides of mower should be the same or within 1/4"...
Page 21
SERVICE AND ADJUSTMENTS TO CHECK AND ADJUST BRAKE (See Fig. 21) Your tractor is equipped with an ad just able brake system which is mounted on the right side of the transaxle. If tractor requires more than five (5) feet to stop at highest speed in high est gear on a level, dry concrete or paved surface, then brake must be checked and ad just ed.
Page 22
SERVICE AND ADJUSTMENTS • While holding motion control lever in place, loosen the adjustment bolt. • Move motion control lever to the neutral (N) (lock gate) position. • Tighten adjustment bolt securely. NOTE: If additional clearance is needed to get to ad just ment bolt, move mower deck height to the lowest position.
SERVICE AND ADJUSTMENTS REPLACING BATTERY (See Figs. 26 and 27) WARNING: Do not short battery ter mi nals by allowing a wrench or any other object to contact both terminals at the same time. Before connect- ing battery, remove metal bracelets, wristwatch bands, rings, etc.
Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more. WARNING: Never store the trac tor with gas o line in the tank inside a building where fumes may reach an open flame or spark.
TROUBLESHOOTING POINTS PROBLEM CAUSE Will not start Out of fuel. Engine not “CHOKED” properly. Engine flooded. Bad spark plug. Dirty air filter. Dirty fuel filter. Water in fuel. Loose or damaged wiring. Carburetor out of adjustment. Engine valves out of adjustment. Hard to start Dirty air filter.
TROUBLESHOOTING POINTS PROBLEM CAUSE Engine dies when Reverse operation system tractor is shifted (ROS) is not "ON" while into reverse mower or other attachment is engaged. Engine continues to run Faulty operator-safety presence control system. when operator leaves seat with attachment clutch engaged Worn, bent or loose blade.
In the event you have a claim under this Warranty, you must return the product to an authorized service dealer. Should you have any unanswered questions concerning this Warranty, please contact: Poulan Outdoor Products Customer Service Dept. 1030 Stevens Creek Road...
Model Number/Manufacturer's I.D. Number b. Description of part. For Techical Assistance: call 1-800-829-5886 For a Parts Manual, go to our website: www.poulan.com/support.asp NOTE: HOP provides parts and service through its au thor ized dis tribu tors and dealers; there fore, all requests for parts and service should be directed to your local dealer(s).
Page 31
CHANGE concernant l’assistance tions dans décrites celles différentes complète gamme nence agréé distributeur directement agrées; distributeurs l’entretien rechange pièces www.poulan.com/support.asp web: 1-800-829-5886 manufacturer vous: concessionnaire notre contactez pièces certaines pendant nécessaire être peut avec accord fabriqué attentifs, PIÈCES ’ENTRETIEN...
moteur. avant lent) rapide (entre intermédiaire position dans commande transmission. déplacement. d'entraînement courroie position libre roue commande l’alternateur. régulateur. connexions. toutes Vérifiez/remplacez batterie. fusible. connexions. câblage phares. l’interrupteur Vérifiez/remplacez lampe(s). l'ampoule(s) (ON). marche position dans l’interrupteur trous ouvrir pour mandrin faces manuel.
Page 36
endommagées. pièces Remplacez lâches. pièces lame. mandrin lame. boulon fond à Serrez lame. autorisé. d’entretien centre Réglages. Entretien dans Carburateur” Régler “Pour section câblage. tout silencieux. Nettoyez/remplacez moteur/ailettes. d’air tamis d’allumage. bougie serrez d’essence. filtre fraîche, l’essence avec réservoir carburateur, réservoir l’essence fraîche.
Page 37
SONT D’ÉCHAPPEMENT ENDROITS QUAND TRACTEUR JAMAIS COUVREZ tracteur. condensation formation permet obstrue plastique plastique. couverture N’uti- perméable. couverture avec saleté. poussière couvrez-le possible, l’intérieur, à tracteur causera l’essence dans saleté et/ou rouiller. à commence s’il d’essence l’autre. à saison d’une d’essence SUPPLÉMENTAIRE d’allumage.
Page 38
réglage. et/ou réaration autorisé d'entretien centre gazon à tondeuse teur, avec problèms cause tion fonc moteur votre réglable. CARBURATEUR voir né réglage nécessaire. réglage l’usine à préréglée été COMMANDE RÉGLER voir nécessaire, réglage nécessaire. réglage l’usine à préréglée été CÂBLE FIG.
Page 40
FIG. 01510 manuel). section TON- INSTALLER “POUR (Voir tondeuse courroie. retenues toutes toutes dedans poulie l’intérieur à acheminée soit courroie d’embrayage. stationnaire galet-tendeur travers moteur. poulie supérieure autour roulez-la tracteur l’avant vers central. l’écartement guide dans transmission refroidissement vers courroie nouvelle soigneusement COURROIE...
Page 41
FIG. DEUR GALET-TEN POULIES manuel). section TON- INSTALLER "POUR (voir tondeuse courroie. guides toutes toutes dans soit courroie galet-tendeur. poulies poulies deux autour courroie COURROIE tondeuse. galet-tendeur. mandrin poulies deux loin courroie manuel). section cette ENLEVEZ “POUR (voir tracteur COURROIE stationnement.
Page 42
CHAR DÉ DÉFLECTEUR CÔTÉS) DEUX (LES RETENUE RESSORTS AVANT RACCORD MOTEUR POULIE CARRÉ TROU L'AUTRE À CÔTÉ votre correctement trop suffisamment sont pneus “SPECIFICA-TIONS section (Voir pres- Assurez-vous plate. voiture stationné soit tracteur pendant TONDEUSE BOÎTIER moteur. poulie petit avec fixez-les galet-tendeur l’embrayage...
votre tracteur votre débris gazon, enlever pour feuilles à souffleuse l’air Utiliser tracteur. votre transmission, moteur l’intérieur. à l’eau l’infiltration soient transmission moteur votre nettoyer pour pression sous lavage d’arrosage tuyau d’un l’utilisation d’auto. cire avec peintes surfaces etc. l”huile l’essence, enlevant roues...
Page 44
d’entretien centre votre contactez réparée, transmis- transmission. durabilité n’est fluide l’entretien l’usine à scellée SION TRANS ailettes nettoyer pour pression haute comprimé l’air n’utilisez d’étanchéité, l’avarie empêcher Pour matériaux. l’herbe saleté, pour refroidissement intactes. propres soient ventilateur s’assurer pour refroidissement ventilateur sion trans...
Page 45
FIG. LAME BOULON ÉTOILE CENTER TROU MANDRIN HAUT RECHANGE PIÈCES SECTION APPROUVÉ BOULON SEULEMENT REMPLACER, BESOIN BOULON À TRAITÉ LAME BOULON 37-47 rotation couple lame, boulon rondelle frein, rondelle lame, L'ÉTOILE AVEC LAME CENTRE ADÉQUAT, L'ASSEMBLAGE ASSURER illustré. comme haut vers aiguisée avez...
Page 46
GRAPHITE. TYPE POUDRE MODÉRATION AVEC SEULEMENT ÊTRE DOIVENT QU’ILS PENSEZ VOUS LUBRIFICATION À PALIERS DURABILITÉ SALETÉS POUSSIÈRE ATTIRENT NYLON. PALIERS GRAISSE D’HUILE METTEZ MOTEUR ENTRETIEN SECTION USAGE ➁ MOTEUR ANTÉRIEURE ROUE PALIER PRESSION ➀ À GRAISSEUR BROCHE PRESSION ➀ À GRAISSEUR LUBRIFICATION entretien.
Page 47
l’ac à terrain convient toujours choisissez accessoires, tondeuse rendement meilleur vitesse Choisissez matériau. char dé tondre rendement meilleur plein à commande avec avant l’herbe sécher Laissez tondeuse. ’herbe mouillée. elle quand l’herbe désirée. hauteur à faire doit haute. assez coupe pour l’appareil sèche.
Page 48
ci-haut. gleur l'étran utilisant minute pendant fois autre démarrez-le charge, peut moteur utilisés. être d'en- commande accessoires rapide. position déplacez moteur, démarrez plus) 50°F CHAUD TEMPS encore. essayez étrangleur dé essais, dé moteur encore. essayez rapi position à commande essais, quelques après démarre...
Page 49
tracteur. arrière d’attelage libre roue commande libre. roue déplaçant désengrenée assurez-vous tracteur, remorquez TRACTEUR TRANSPORTER progressivement. lente. déplacement commande levier frein/embrayage. ment tion frein lentement dégagez ENFONCÉE. FREIN/EMBRAYAGE QUAND MORT POINT POSITION DÉPLACEMENT COMMANDE LEVIER (N). à déplacement commande stationnement. freinage.
Page 50
hauteur à fois deuxième longue; fois première fois. deux tondre devez 15,24 plus mesure l’herbe rendement, tats. ré meilleurs pour souvent saison pendant po.) 7,62 plus pendant po.) (2-1/2 6,35 à tondue tondus. l’herbe hauteur terrain, à changer raient pour elles approximatives pas.
position. à changement levage levier relâche LEVAGE moteur. démarrer tracteur débrayer permet FREIN/EMBRAYAGE d’allumer/éteindre permet LUMIÈRES (BRAKE). frein position pédale bloque STATIONNEMENT autres tondeuse soulever permet D’ACCESSOIRE montés accessoires autres tondeuse pour utilisé D’ACCESSOIRE Institute. Standards DÉPLACEMENT LEVIER MENT TION FREIN LEVIER ALTURA...
Page 52
propriété. l'endommagement blessures mort, conséquence pourrait évité, n'est s'il propriété. et/ou sérieuses conséquence comme avoir s'il qui, risque indique et/ou tracteur résulter pourrait situation symbole sans utilisé mineures blessures évité, n'est s'il qui, risque sérieuses. conséquence comme n'est s'il qui, risque mort conséquence...
nuel dans TRANSMISSION” DÉMARRER “POUR sections sion trans purge démarrage instructions Suivez fois. première démarrer avant transmission purger manuel). Entretien chapitres (Cf. correctement fonctionnent arrière marche fonctionnement l’opérateur présence Système ris- sans fonctionne frein système com- toutes l’emplacement fonction vous assurez-vous moteur, plomb...
Page 54
contre décharge déflecteur tient rouler. faisant palette hors manuel). fonctionnement section TRANS- “POUR (Voir transmission. roue position à libre roue commande stationnement. dégager pour frein/embrayage pédale haute. plus position à levier placez piston levage com- fonction connaître pour ment tion (Voir ROULER FAISANT...
Page 55
FIG. PATTES FENTES RALLONGE ARBRE PATTES TION MANCHON PLATE GRANDE 5/16 FREIN RONDELLE 5/16 HEXAGONAL ÉCROU pour outils bons Utilisez fond. à serrées cor- l’utilisation assurer Pour l’expédition. TRACTEUR CREVER centre 5/16 frein, direction. l'inte- à glissez-les glissez-le soient tracteur manchon par-dessus inférieur.
Page 57
25-26 DÉPANNAGE 19-23 RÉGLAGES 15-18 proche. plus centre disponible silencieux fonctionne- etat maintenu être pare-étin- Quand applicables. locales rencontre pare-étincelles d’un muni système d’herbe d’arbrisseaux, d’un près utilisé être doit à moteur d’un équipé tracteur propriétaire. Entretien sections dans instructions tion d’uti d’entretien,...
Page 58
descente. dans lentement tournez dans nécessaire, n’est cela pentes dans virage lentement. reculez arrière lames, dégagez montée, s’arrête pente. vers lames dégagez plus, n’adhèrent dans virages arrêts démarrages, pentes. dans vitesse devoir afin faible vitesse pénètre enfant moteur éteignez transversalement. maxi), (15°...
Page 59
s’éboule. bord par-dessus l’improviste à culbuter risque fossés ravins, proximité pied mettant machine stabiliser l’utilisez machine. risquent accessoires d’autres avec machine utilisez vous lorsque machine. culbuter faire vitesse brusquement jamais changez lents mouvements n’effectuez pente. vers lames dégagez plus, n’adhèrent dans virages arrêts...
Page 60
AVERTISSEMENT: JETEZ www.poulan.com l’utilisation. lors struc PELOUSE vous sures tions struc tous suivez Lisez PROPRIÉTAIRE 03076 10.11.07 web: site notre sécurité lunettes toujours TRACTEUR PBA195H42LT MODÈLE: MANUEL IMPORTANT 417183 Visitez Portez MANUEL...
Need help?
Do you have a question about the 417183 and is the answer not in the manual?
Questions and answers