Step 5 Setup And Check; Starting The System - Contec EAD-CE-EC User Manual

2. Setup

Step 5 Setup and Check

Starting the system

The expansion chassis is turned on and off in sync with the PC's power supply.
Turning on the system
(1) Plug the power code of the expansion chassis into a wall outlet.
You do not need to press the POWER switch on the front panel (*1).
(2) The power supply of a PC is turned ON.
(3) As the PC is turned ON, the power of the expansion chassis also comes ON.
(4) Make sure that the POWER LED on the expansion chassis is on.
Turning off the system
(1) The power supply of a PC is turned OFF.
(2) The expansion chassis is turned off in synchronization with the PC's power supply.
*1 Pressing the POWER switch on the front panel of the expansion chassis turns on the
expansion chassis or puts it to sleep.
Use the switch, for example, to turn on only the expansion chassis.
CAUTION
- Do not turn on or off the expansion chassis with the PC main unit powered.
Doing so cancels the detection of the bus adapter. When turning the expansion chassis on back,
restart the PC main unit.
12
EAD-CE-EC