Table of Contents
Advertisement
USING YOUR PARTY CHOPPER
Before first use, remove any packaging material or labels before first use. Wash all
pieces of the Party Chopper in warm, soapy water. Dry thoroughly. Care should be
taken when cleaning the blades, as the blades are sharp.
USING THE 48 OUNCE PITCHER
CAUTION: Blades are sharp! Use extreme caution when handling the blades. Always
hold them by the shaft.
1.
Place the 48 oz Pitcher on a clean, dry, level surface.
2.
Holding the Tall Pitcher Blade by the shaft, place it onto the spindle inside the Pitcher.
3.
Add the ingredients to be processed into the Pitcher.
4.
Place the Pitcher Splash Guard onto the top of the Pitcher.
5.
Place the Power Head on top of the Pitcher Splash Guard making sure that it is
securely in place. Do not attempt to operate the appliance without the Pitcher
Splash Guard in place.
6.
To start, press the On/Off Pulse Button located on the top of the Power Head. To
stop, remove fingers from the On/Off Pulse Button. To obtain a better chopping
effect, momentarily press the On/Off Pulse Button instead of pressing and holding.
If the ingredients stick to the sides, stop the Party Chopper, remove the Power Head
and the Pitcher Splash Guard. Use a spatula to clean the sides and then replace
the Pitcher Splash Guard and Power Head. Continue blending. NOTE: Do not
operate the Party Chopper continuously for more than 15 seconds at a time.
7.
Hold the 48 oz Pitcher firmly while pressing the On/Off Pulse Button to ensure the
unit stays in place.
8.
Maker sure the blades have stopped completely before removing the Pitcher Splash
Guard.
9.
Remove the Tall Pitcher Blade by its shaft before you empty the contents of the
Pitcher.
10. Never add ingredients into the Pitcher before placing the Tall Pitcher Blade in first.
USING THE 16 OUNCE BOWL
CAUTION: Blades are sharp! Use extreme caution when handling the blades. Always
hold them by the shaft.
1.
Place the 16 oz Bowl on a clean, dry, level surface.
2.
Holding the Short Bowl Blade by the shaft, place it onto the spindle inside the Bowl
3.
Add the ingredients to be processed into the Bowl.
4.
Place the Bowl Splash Guard onto the top of the Bowl.
5.
Place the Power Head on top of the Bowl Splash Guard making sure that it is
securely in place. Do not attempt to operate the appliance without the Bowl Splash
Guard in place.
6.
To start, press the On/Off Pulse Button located on the top of the Power Head. To
stop, remove fingers from the On/Off Pulse Button. To obtain a better chopping
effect, momentarily press the On/Off Pulse Button instead of pressing and holding.
If the ingredients stick to the sides, stop the Party Chopper, remove the Power Head
and the Bowl Splash Guard. Use a spatula to clean the sides and then replace the
Bowl Splash Guard and Power Head. Continue blending. NOTE: Do not operate
the Party Chopper continuously for more than 15 seconds at a time.
5
Advertisement
Table of Contents
