Table of Contents
Advertisement
Controls Cont'd
Headset Interface Send Level
8
Adjusts audio signal level to the mobile device.
Headset Interface Receive Level
9
Adjusts audio signal level coming from the mobile device.
Headset Interface Jack
10
Connect to the headset jack of your mobile device with supplied CN113
interface cable if no phone line is available.
Auto-Answer
11
When enabled, Interchange LTD automatically answers an incoming call
and then disconnects after the caller hangs up. Auto answer will occur on
the first ring.
Numeric Keypad
12
Dial a number.
Redial
13
Press this button to instantly redial the last telephone number.
Call Button
14
Takes the line off-hook; press this button to answer a call or you can
direct a call from your aux phone through the hybrid.
OH LED
15
Lit when you are on line with a call (off-hook).
Power LED
16
Lit when unit is plugged in and receiving power.
Drop Button
17
Press this button to drop (hang up) a call.
Signal LEDs
18
Send LEDs represent the signal level going out to the telephone line.
Caller LEDs represent the signal level coming from the phone line,
after the DSP.
Send and Receive Level
19
Adjusts the audio signal that you are sending down the telephone line and
the level of the incoming caller's audio as it is going out the Mixout jack.
3.5mm TRRS Headset Jack with Volume Control
20
Monitor Intercom/Hybrid audio with a TRRS headset.
Getting to Know Your Interchange LTD
Getting to Know Your Interchange LTD
3
Advertisement
Table of Contents
