Table of Contents
Advertisement
None
Allow Association to
Mixed Cells
Limit Time for
Finding Domain
Controller To
Group Policy Delay
5. Antenna Information
Antenna
Model
Type Connector 2400~2483.5MHz 5150~5250MHz 5250~5350MHz 5470~5725MHz 5725~5850MHz
ANT0 (Left) Printed
ANT1 (Right) Printed
No security (not recommended).
Check this check box if the access point with which the client adapter is
to associate has WEP set to Optional and WEP is enabled on the client
adapter. Otherwise, the client is unable to establish a connection with
the access point.
Check this check box and enter the number of seconds (up to 300) after
which the authentication process times out when trying to find the
domain controller. Entering zero is like unchecking this check box,
which means no time limit is imposed for finding the domain controller.
Note: The authentication process times out whenever the authentication
timer times out or the time for finding the domain controller is reached.
Specify how much time elapses before the Windows logon process
starts group policy. Group policy is a Windows feature used by
administrators to specify configuration options for groups of users. The
objective is to delay the start of Group Policy until wireless network
authentication occurs. Valid ranges are from 0 to 65535 seconds. The
value that you set goes into effect after you reboot your computer with
this profile set as the active profile.
This drop-down menu is active only if you chose EAP-based
authentication.
NA
0.4
NA
4.24
Peak gain ( dBi )
2.38
1.53
0.73
0.62
15
0.61
1.76
1.19
0.93
Hide quick links:
Advertisement
Table of Contents
