Manual Recording; Video Motion Detection - Harbor Freight Tools Cobra 63842 Owner's Manual & Safety Instructions

Video Motion Detection

Note: Video Motion Detection overrides
Scheduled and Manual Recording.
To record all Cameras, touch
To record the Camera that has been activated, set viewing Mode to Camera Sequence.
1. Touch to open the Menus screen
and toggle right to select Detect.
2. Toggle Up/Down to select the desired
camera for Motion Detection.
3. Select Sensitivity Settings for Motion Detection
recording. Choose between High, Medium, Low
and Off. Press to return to viewing mode.
Page 14
to set viewing Mode to 4 Camera.
For technical questions, please call 1-888-866-5797.
4. When motion has been detected, recording will
begin.
will begin flashing.
REC
Note: Recording will occur for the duration
specified in Recording Set up.
5. Touch again to deactivate motion detection.
Item 63842