Installation Problems
Windows NT 4.0 could not find the adapter
•
The adapter is not properly inserted in the slot
1.
Power off the computer
2.
Remove and reinsert the wireless adapter
3.
Reboot the computer and re-install the adapter driver
•
A previous adapter installation was aborted by the user, or by Windows NT
4.0
1.
Look in Control Panel/Network/Adapters
2. If an InstantWave adapter entry exists, remove it from the
list and exit the Control Panel/Network dialog box
3. Reboot the computer and re-install the adapter driver
The InstantWave adapter driver cannot be started and the adapter LEDs are not
flashing
•
More than one driver is present in the Network setup folder
Click Control Panel/Network/Adapters
1.
2. If there is more than one entry for the same InstantWave
adapter, remove them all
3. Reboot Windows NT
Reinstall the InstantWave adapter driver
4.
20
Wave High Speed
Instant
PCI/PC Card