Table of Contents
Advertisement
power cord from the wall socket
step2.
Remove the computer's cover
step3.
Select a free PCI Bus expansion slot and remove the slot cover
step4.
Carefully install the card in the expansion slot by firmly pressing until
the card is snugly seated. Be sure the card is fully home. Fasten the
retaining bracket with the screw from the slot cover
step5.
Replace the computer cover and reconnect the previously disconnected
cables
step6.
Screw the antenna into the InstantWave card (Figure 5).
F
5. C
IGURE
ONNECTING THE
step7.
Repeat the above procedure to fit an InstantWave card into each of the
other computers to be networked
PC Card Installation
The PC Card fits into a Type II or Type III PCMCIA slot. The antenna is encased
in a plastic case, in line with the main body of the PC card, such that it extends
outside the PCMCIA slot when the card is inserted. The slot must allow for a card
extension of up to 30mm as specified in the PC Card specifications.
6
Wave High Speed
Instant
A
C
DAPTER
ARD
PCI/PC Card
A
NTENNA
Advertisement
Table of Contents
