G.SKILL Ripjaws KM570 RGB User Manual page 25

Lighting Profiles
Add/Remove a Color
To add (or delete) a color point, click on
the "+" or "-" under "Color Controller" in
the right column. A new color point will be
added.
Change a Color
Click the square of a color point under
"Color Controller", and then change the
color by doing one of the following:
1. Click in the color selection rectangle
2. Click and drag the RGB color slider
3. Enter the RGB value
4. Enter the HEX color code
5. Click a color in the color palette
Note: When adding a color point, the color
point will be inserted at the mid-way point
between the currently selected color point
and the next one (to the right).
Note: The left-most and right-most color
points cannot be deleted.
Add a Color
Color Point
G.SKILL RIPJAWS KM570 RGB User Manual 25