Advertisement
Macros (Keystroke)
Insert Commands in a Macro
Click the keystroke location you wish to
insert an additional command. Then click
"Insert" on the bottom of the middle
column. Options will appear in the right
column to allow inserting before or after
the selected keystroke command.
You can choose to customize a delay, then
click on "Record" in the right column to
insert additional keystroke commands.
Click "Save" to save the changes.
Tip: If you want the macro to repeat,
you can set "Toggle Macro On/Off" or
"Continuous Repeat While Pressed"
when assigning a macro to a key in the
"Customize" menu. (Go to Customize >
[click a key] > Key Assignment > Macro >
Playback Option)
G.SKILL RIPJAWS KM570 RGB User Manual
17
Advertisement
