GIGA-TMS GUARDSCAN GS120 User Manual page 4

GS120 Series 125KHz RFID Reader
MACHINE TYPE
GS120
RS232 Interface
GS120U
USB Interface
Read the instructions on your device before installing
batteries
1. Insert batteries into your device properly, with the (+) and (-) terminals aligned correctly.
2. Discharged batteries should be removed from equipment to prevent possible damage.
3. Store the batteries in a cool and dry place. [Batteries should be stored at temperatures between 50°F (10°C) and 77°F
(25°C), with relative humidity not exceeding 65 percent. Refrigeration of alkaline batteries is not necessary because
of their very good capacity retention. Excessive temperature cycling and storage at temperatures greater than 77°F
(25°C) should be avoided to maximize shelf life.]
4. Remove batteries from the electrical device if the device is not going to be used for a long time.
5. Keep battery contact surfaces and battery compartment contacts clean by rubbing them with a clean pencil eraser or
a rough cloth each time you replace batteries.
6. Keep batteries away from children. If swallowed, contact a physician at once.
7. Don't recharge a battery unless it is specifically marked "rechargeable". Attempts to recharge an alkaline battery
may cause an imbalance within the cell, leading to gassing and possibly explosion on either charge or discharge
cycles.
8. Don't dispose of batteries in a fire—they may rupture or leak.
9. Don't carry loose batteries in a pocket or purse with metal objects like coins, paper clips, etc. This will short-circuit
the battery, generating high heat.
Information
125K
RS-232
AUTO
OFF
OFF
125K
USB
Ver 1.1
AUTO
OFF
OFF
4
FUNCTION
Muti-Battery
Single Cell
NiHM / NiCd
LR03 / AAA
ALKALINE
8192
BEEP
REC QUEUE
G N
FMM
ET
VER 1.2
Muti-Battery
Single Cell
NiHM / NiCd
LR03 / AAA
ALKALINE
8192
BEEP
REC QUEUE
N
G
FMM
ET
VER 1.2
F - MEM
512 KB
RTC
LCD
F - MEM
512 KB
RTC
LCD