Power Automatically Turns Off After Turned On - Hanatech MULTISCAN plus User Manual

Table of Contents

Advertisement

Hanatech Co., Ltd.

Power automatically turns off after turned on

Multiscan requires the power of 8V or higher for
proper operation. Insufficient vehicle battery
voltage may result in prompt system turn off.
Check the vehicle battery voltage
It is lower than 10 V
Use the other power source
Replace the vehicle battery with fresh new one.
Or use external vehicle battery for temporary
power supply.
Multiscan requires the power of 600mA or more
for proper operation. Insufficient power amperage
may result in prompt system turn off.
It is lower than 600mA
Use the other power source
Replace the vehicle battery with fresh new one.
Or use external vehicle battery for temporary
power supply.
Check the battery voltage
Check the power Amperage
It is normal. It is higher than 600mA
Report to your local distributor
The distributor may have to replace the main
board. Report the symptoms to your local
distributor and wait for our instruction
Chapter 8 - 3
Chapter 6
It is normal. It is higher than 10 V

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MULTISCAN plus and is the answer not in the manual?

Subscribe to Our Youtube Channel

Related Products for Hanatech MULTISCAN plus

Table of Contents

Save PDF