Related Manuals for Adastra RZ45
Summary of Contents for Adastra RZ45
- Page 1 RZ45 + TR86 REMOTE ZONE AUDIO MATRIX Item ref. RZ45: 953.045UK TR86: 953.050UK (optional CS-5 call station: 953.049UK) User Manual Version 1.0...
- Page 2 Damage caused by misuse is not covered by the warranty Introduction Thank you for choosing an Adastra RZ45 remote audio matrix system for your distributed audio installation. This unit is designed to offer a flexible and expandable solution for a wide array of commercial sound systems.
-
Page 3: Front Panel
Each TR86 remote control can select an audio source from 1, 2, 3 or 4/USB. Audio sources 1, 2 and 3 are line inputs which can be connected to the rear panel of the RZ45 via L+R RCA sockets (18) The output level for each of these can be trimmed using rotary level controls (17) to avoid overloading the zone output. - Page 4 The active audio source is indicated by LEDs at the side of the source select pads (29) The front panel of the main RZ45 unit has LEDs to show the audio source status for each zone (5) along with LED level meters (4) “BGM”...
- Page 5 As with the TR86 remote, the CS-5 call station requires a separate 24Vdc power supply if the network cable run is longer than 100m. This can enable the CS-5 call station to operate up to 1km away from the main RZ45 unit when 24Vdc power is supplied to it (43) Connect the CS-5 gooseneck microphone to the base unit, ensuring that it is secured and properly connected (32) before powering up.
- Page 6 Back electret condenser Polar pattern Cardioid Controls Aux/Mic/Chime levels, chime DIP switches, zone/call/reset buttons Connectors RJ45 (8P8C) to RZ45, 24Vdc power jack, 3.5mm aux in Frequency response : -3dB 150Hz - 22kHz Input level Mic: -46dBV, Aux: -10dBV Input impedance...
Need help?
Do you have a question about the RZ45 and is the answer not in the manual?
Questions and answers