BIW0714 BUILT-IN 7KG 1400RPM WASHING MACHINE Instruction Manual Serial number: Please read these instructions carefully before use and retain for future reference. Before switching on your appliance – Always check for any damage that may have been caused in transit.
IMPORTANT SAFETY INSTRUCTIONS Read and follow all of the instructions even if you feel you are familiar with the product, and find a place to keep this manual handy for future reference. General Safety When using electrical appliances, basic safety precautions should always be followed: •...
Intended Use • This appliance has been designed for domestic use. It is not suitable for commercial use and it must not be used out of its intended use • The appliance must only be used for washing and rinsing of laundry that are marked accordingly. Children’s Safety •...
TECHNICAL SPECIFICATION Trade Mark Statesman Model Number BIW0714 Rated Capacity (kg) Category Type Front Loading Programs to which the information relates to Cotton 60°C and 40°C Energy Efficiency Class / Scale from A+++(Highest Efficiency) to D (Lowest Efficiency) A+++ Annual Energy Consumption (kWh/yr) Energy Consumption of the Standard 60°C...
INSTALLATION Refer to the nearest Authorised Service Agent for installation of the product. To make the product ready for use, review the information in this user manual and make sure that the electricity, tap water supply and water drainage systems are appropriate before calling the Authorised Service Agent. If they are not, call a qualified technician and plumber to have any necessary arrangements carried out.
• Open the taps completely after making the hose connection to check for water leaks at the connection points. If any leaks occur, turn off the tap and remove the nut. Retighten the nut carefully after checking the seal. To prevent water leakages and damages caused by them, keep the taps closed when the machine is not in use.
Electrical connection Connect the product to a grounded outlet protected by a 13A fuse. The manufacturer shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations. • Connection must comply with national regulations. •...
Transportation of the Appliance • Unplug the product before transporting it. • Remove water drain and water supply connections. • Drain all water that has remained in the product. See “Cleaning and Maintenance” section. • Install transportation safety bolts in the reverse order of removal procedure. See “Removing the transportation bolts”...
Page 11
Built-in Kit Included 1. Self-tapping screws (ST4*12) 2. Self-tapping screws (M5*12) 3. Hinges 4. Counter magnet 5. Spacer 6. Positioning template Tools required for installation 1. Screw Driver 2. Power Drill 3. Ruler 4. Pencil Positioning Template • Make the mark on the door according to the cupboard and washing machine height. Positioning Template •...
Page 12
Drilling holes in cabinet door • Drill holes in the cabinet door according to the fixed positioning template. Installation of the hinges and spacers • Fix the hinges to the door by means of the ST4*12 screws. The hinges can be adjusted to compensate for possible uneven thickness of the door.
PREPARATION You should always sort laundry according to type of fabric, colour, and degree of soiling and allowable water temperature. Always obey the instructions given on the garment tags. Laundry Wash Symbols...
Preparing laundry for washing • Laundry items with metal attachments such as underwired bras, belt buckles or metal buttons will damage the machine. Remove the metal pieces or wash the clothes by putting them in a laundry bag or pillow case. •...
Correct Load Capacity The maximum load capacity depends on the type of laundry, the degree of soiling and the washing program desired. The machine automatically adjusts the amount of water according to the weight of the loaded laundry. WARNING: Follow the information in the “Program and Consumption Table”. When overloaded, the machine’s washing performance will drop.
Tips for efficient washing Clothes Light colours and Colours Dark colours Delicates/Woolens/ whites Silks (Recommended (Recommended (Recommended (Recommended temperature range temperature range temperature range temperature range based on soiling based on soiling level: based on soiling level: based on soiling level: cold-30ºC) 40-90ºC) cold-40ºC)
OPERATING INSTRUCTIONS Control Panel Program selection dial LED Display showing Start/Pause On/Off User can select required Pre Wash/Extra Rinse/Time Press this button to start Press once to turn washing washing program for wash load Remaining/Door Lock /Child Lock or pause the wash cycle machine on, press again to turn washing machine off Quick Wash 15...
Main Programs Depending on the type of fabric, use the following main programs. Cotton Intensive You can wash your durable and heavily soiled clothes on this program. This program washes for a longer time and an extra rinse cycle will be made compared to the “Cottons” program. Cotton 60°C/40°C/20°C Use this program for your cotton laundry (such as bed sheets, duvet and pillowcase sets, towels, bathrobes, underwear, etc.).
Sportswear Use this program to wash textiles made of microfibers. This program is designed to remove dirt whilst optimally preserving the technical features of the garments. Baby Care Use this program to wash baby laundry, and the laundry that belongs to allergic persons. Longer heating time and an additional rinsing step provide a higher level of hygiene.
Spin Speed Selection Whenever a program is selected, the recommended spin speed of the selected program is displayed on the spin speed indicator. To decrease the spin speed, press the Spin Adjustment button. Spin speed decreases gradually. Loading door lock There is a locking system on the loading door of the washing machine that prevents opening the door in cases when the water level is unsuitable.
Cancelling the program • Press the Start/Pause button • Press the On/Off button to turn appliance off • Press the On/Off button to turn appliance back on again Note: If you want to open the loading door after you have cancelled the program but it is not possible to open the loading door since the water level in the machine is above the loading door opening, then turn the Program Selection dial to Drain program and discharge the water in the machine.
CLEANING AND MAINTENANCE Cleaning the appliance at regular intervals can decrease the amount of common problems, as well as extending the service life of the machine. Cleaning the detergent drawer How to remove powder residue, which has built up in the detergent drawer •...
• Unplug the machine to cut off the supply power. • Close the taps. • Remove the nuts of the water intake hoses to access the filters on the water intake valves. Clean them with an appropriate brush. If the filters are too dirty, take them out by means of pliers and clean them.
TROUBLESHOOTING If you are having problems with your appliance, please use our troubleshooting guide below. If you are unable to resolve the issue using this guide please ring our Customer Service Department on 0844 848 5861. Please have the model code and purchase information available. Problem Reason Solution...
TROUBLESHOOTING (CONTINUED) Problem Reason Solution Loading door cannot Door lock is activated because of Drain the water by running the Drain or Spin program be opened the water level in the machine Machine is heating up the water or Wait until the program completes it is at the spinning cycle Child lock is engaged.
Drain pump is blocked Wash drain pump filter Please call Statesman Customer Service if error persists Please call Statesman Customer Service if you encounter any other problems DISPOSAL The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in normal unsorted municipal waste.
Need help?
Do you have a question about the BIW0714 and is the answer not in the manual?
Questions and answers