Sleep Timer - SoundLogic BCRU-12/0137 Instruction Manual

Talking using the Bluetooth Speaker Function
Please ensure that your cell phone is paired with the Bluetooth Speaker Function to
use the below functions.
Function
Answer Incoming
Call
Reject Incoming
Call
End Call
Volume Increase
Volume Decrease
Redial last dialed
number

SLEEP TIMER

The sleep timer allows you to turn the unit off after the preset time is reached.
You can use the sleep timer to fall asleep for 90, 80, 70, 60, 50, 40, 30, 20 or 10
minutes intervals.
1. Select the desired radio station or activate your AUX IN / Bluetooth source and
set the volume to the comfortable level.
2. Press the SNOOZE/SLEEP/DIMMER button repeatedly to select a sleep time.
Each time the button is pressed, the sleep time will be decreased in 10 minute
increments. The unit will play for the selected length of time then automatically
turn off.
Charging iPad, iPhone or other mobile phone...etc
Connect the charging cable (not supplied) to the USB Charging Port on the top of the
unit and your device (iPad, iPhone or other mobile phone...etc), the charging will
start.
Note: The maximum output from the USB port is DC 5V 2.1A. Refer to the user's manual
for your specific device for manufactures required charging amperage as well as
determining the appropriate cable for your device before charging.
Operation Button
Incoming Call Short press the MFB button to answer an
incoming call.
Incoming Call Long press the MFB button for 2-3 seconds
Incoming Call After your phone conversation, short press
the MFB button
During a call Long press on the VOLUME +/ AL1 button
will increase the volume
During a call Long press on the VOLUME -/ AL2 button
will decrease the volume
Connected to Quick press the MFB button twice to redial
a device the last dialed number
8