Table of Contents
Advertisement
55702_Sec02-1_'08 08.2.12 9:45 AM Page 19
WINDSHIELD WASHER
To spray washer fluid on the windshield, push the button on the end
of the combination switch lever. The spray will continue as long as you
hold in the button. After using the windshield washer, turn the wipers
off by setting the switch to "
Operating Tips
•
Clear ice or packed snow from the wiper blades before using the
wipers. Carefully loosen or thaw wipers that are frozen to the
windshield.
•
Check the washer fluid level regularly. Do it often when the weather
is bad.
•
Use a good quality windshield antifreeze to help prevent freezing
damage, and for better cleaning. Be sure to add the fluid to the
proper reservoir.
•
Fill the washer fluid reservoir only 3/4 full during the winter to allow
for expansion if the temperature should fall low enough to freeze
the solution.
NOTICE: Do not use radiator antifreeze in the windshield washer, it
could cause paint damage and cloud the glass.
•
In cold weather, warm the windshield with the defrosters before using
the washer, to help prevent icing that may block the driver's vision.
•
The washer fluid reservoir is located to the right of the glove box.
EXHAUST BRAKE OPERATION
The system, when turned on, increases the amount of power absorbed
by the engine while coasting in gear. Whenever slowing down the
vehicle, such as on down grades, in city traffic or approaching stop
signals, this brake system may be used.
Lift the right hand control lever up to turn the exhaust brake on. An
indicator in the instrument panel lights when the exhaust brake switch
is on. Pull the lever up again to turn the exhaust brake off during idling.
".
Window Washer Switch
Window Wiper Switch
2-19
2-19
Hide quick links:
Advertisement
Table of Contents
