Page 1
38” MINI TRAMPOLINE MODEL# 9038MT PRODUCT MANUAL - VERSION 12.16.06 FOR AGES: WEIGHT LIMIT: 100 Kgs ADULT(S) NEEDED: TOOLS NEEDED: WARNING/ADVERTENCIA CUSTOMER SERVICE • Do not allow more than one person • The contents of this package are GQBrands.com on this product at any time.
CUSTOMER SERVICE INFORMATION Thank you for purchasing: 38” MINI TRAMPOLINE MODEL# 9038MT At Global Quality Brands®, we want all of our customers to be To order these parts, or if you have any other questions or concerns completely satisfied with their purchase. Please take time to review...
TO USE. ALL MERCHANDISE IS SOLD ON THIS CONDITION, WHICH NO products are not covered by the product warranty. No other warranty REPRESENTATIVE OF GQ BRANDS® CAN WAIVE OR CHANGE. beyond that specifically set forth above is authorized by GQBrands®. MODEL# 9038MT...
WARNINGS IMPORTANT MESSAGE WARNING - PLEASE READ ADULT ASSEMBLY REQUIRED CHOKING HAZARD - Small Parts NOT for children under 3 years of age. WARNING: While every attempt is made to ensure the highest degree of protection in all equipment, we cannot guarantee freedom from injury. The user assumes all risks of injury due to use.
Page 5
• Do not allow small children to wander into fixtures, windows, furniture, appliances, the play area where the trampoline is in use. etc. Keep on a level surface. MODEL# 9038MT...
ASSEMBLY WARNINGS • Make sure the trampoline is placed on a stable and leveled surface. • The recommended overhead clearance is a minimum of 10 feet from any and all ceilings, overhead cables, ceiling fixtures or hard surfaces. • Make sure the trampoline area is well lit. In terms of horizontal clearance, ensure that potentially hazardous objects and conditions are located at a recommended minimum •...
Page 7
PARTS LIST Part # Description Part# Description Frame Jumping Mat Washer Spring Frame Pad W-Hook Leg with Cap T-Section Piece U-Shaped Bracket 40mm Square Neck Bolts MODEL# 9038MT...
Page 8
ASSEMBLY INSTRUCTIONS STEP 1: Assembled Frame NOTE: The Frame Pad (Part 9) may be already attached to the Frame, remove it and place it aside until Step 3 The Frame (Part 1), Jumping Mat (Part 2), Springs (Part 3), & W-Hooks (Part 4) should be assembled in one piece.
Page 9
Make sure Bolt is fully inserted and the Nut is not fully tightened. This will help inserting the Legs in Step 5. C. Continue to install all T-Sections in the remainder of the openings of the frame. Tighten Loosely MODEL# 9038MT...
Page 10
ASSEMBLY INSTRUCTIONS STEP 3: A. Flip the Frame & Jump Mat in order to place the Frame Pad (Part 9). Make sure to locate all six loops in the Frame Pad. Line them up to all T-Sections inserts. B. Hook all loops in the inserts openings of the T-sections before installing the legs.
Page 11
You may now fully tighten all Nuts on the trampoline. STEP 6: Flip the Mini-Trampoline over. Inspect that all parts are properly installed before use Tighten and place in a safe and open area. Tighten MODEL# 9038MT...
FREQUENTLY ASKED QUESTIONS • Question: “One of my trampoline legs has • Question: “I had a part missing from my broken” or “The trampoline padding or box” or “something was damaged during assembly, can you send it to me?” mat is damaged, how do I replace it?” Answer: If you are still within your Answer: If it has been 30 days or less warranty period (90 days from initial...
Need help?
Do you have a question about the 9038MT and is the answer not in the manual?
Questions and answers