Field of View
For accurate measurement, make sure that the target is
larger than the unit's spot size. The smaller target, the
closer you should be to it.
16
Loca ng a Hot or Cold Spot
To find a Hot or Cold Spot, aim the thermometer outside
the desired area, then slowly scan across the area with an
up and down mo on un l you locate a Hot or Cold Spot.
18
Introduc on
The FLeX IR-121, ILV-121, ILV-151, and ILV-301 Infrared
Thermometers (the Product) can determine the surface
temperature by measuring the amount of infrared energy
radiated by the target's surface. Note that the Japanese
models indicate Celsius only.
Warning
Read all safety informa on before you use the Product.
Safety Informa on
A Warning iden fies condi ons and procedures that are
dangerous to the user. A Cau on iden fies condi ons and
procedures that can cause damage to the Product or the
equipment under test.
Table 1 tells you about symbols used on the Product and in
this manual.
Warning
To prevent eye damage and personal injury:
● Read all Safety Informa on before you us the Product.
● Do not use the Product if it operates incorrectly.
● Use the Product only as specified, or the protec on
supplied by the Product can be compromised.
1