Planar WN-5040-720 User Manual page 92

Condition
Door open
Power Supply Fan failed
DLP™ Fan failed
350V failed
Optical Engine failed
Lamp failed
2
Lamp off (wait, auto off)
Wait (lamp off, cooling)
3
Lamp off (lamp saver)
Lamp off (ready to turn on)
Lamp striking (starting)
Lamp on, no alarms
R = Red To show the code, press
1
With Priority 1-6, to turn lamp on, cycle AC power off, then on. If Auto Codes in the Miscellaneous menu is
checked, events with Priority 1-5 starts the On-Screen Code automatically, .
2
Lamp Saver turned lamp off; lamp are cooling and will turn on at end of cooling period.
3
A Lamp On command from the remote or from RS232 commands will turn lamp on.
Margay On-Screen Codes
Priority Each block represents 0.2 seconds
1 R R
2 R Amber
3 R Amber
4 R R
5 R R
6 R R
7 R R
8 R R R
9 Amber
10 Amber
11 Amber
12
Amber on continuously
button once.
MONITOR
R R
R
R
Amber
Amber R
R
Amber Amber
R R
Amber R
Amber
Amber Amber
81