Pc Link Function; How To Display The Current Server Name; How To Select Another Pc Server; How To Select Another Network - Philips MCW770 User Manual

Wireless PC link

PC LINK function

PC LINK enables you to playback your
music collection from the PC via the unit.
Before playback can be started the
connection to an installed network/server
must be started. Make sure the wireless
USB adapter is connected or another
network connection works properly.
CD TUNER
CD 1
CD 4
1
Switch on your PC.
Press PC LINK A to select the PC as
2
source.
PC LINK is displayed.
PC NAME is displayed and the last active
server name is scrolled.
The last active server name is displayed
and CONNECTING PC is scrolled.
Note: If no PC server was installed PC LINK
is displayed and INSTALL PC LINK is
scrolled. Install the PC server (see "Quick
installation of the wireless connection to a PC
server").
3
As soon as the connection is made:
PC LINK is displayed and a track name
is scrolled.
Note:The last played track will have been
stored and will be selected automatically.
However, if you switch from one PC server to
another, the first track within the current
BROWSE setting will be selected.
20
AUX PC LINK
CD 2 CD 3
CD 5
VOL
How to display the current server
name
To display the current server name press
0 0
PC LINK A while the display shows
neither a server name nor a network
name.
PC LINK is displayed and the current
server name is scrolled.

How to select another PC server

To switch between further installed
0 0
PC servers press PC LINK A as often as
necessary while a server name is shown.
PC LINK is displayed and the next
server name is scrolled.

How to select another network

1
To switch between further installed
PC networks, press PC LINK A as often as
necessary until the desired network is
shown. (The unit switches through all PC
servers of the current network and then
switches to the next available network.)
2
After 3 seconds with no change to network
selection, the selected network will be
connected.
The network name is displayed and
CONNECTING NETWORK is scrolled.
Note: If the network is not available, the
network name is displayed and
NO CONNECTION TO NETWORK is scrolled.
3
After connecting the network a PC server
will be selected automatically.
The server name is displayed and
CONNECTING PC is scrolled.
Note: If no connection has been detected, the
server name is displayed and NO
CONNECTION TO PC is scrolled.