Table of Contents
Advertisement
ADCP-61-810 • Issue 4 • September 2004 • Preface
COPYRIGHT
© 2004, ADC Telecommunications, Inc.
All Rights Reserved
Printed in the U.S.A.
REVISION HISTORY
ISSUE
1
11/1997
2
03/1998
3
07/1999
4
09/2004
TRADEMARK INFORMATION
RF Worx is a registered trademark of ADC Telecommunications, Inc.
ADC and ADC Telecommunications are trademarks of ADC Telecommunications, Inc.
DISCLAIMER OF LIABILITY
Contents herein are current as of the date of publication. ADC reserves the right to change the contents without prior notice. In no
event shall ADC be liable for any damages resulting from loss of data, loss of use, or loss of profits and ADC further
disclaims any and all liability for indirect, incidental, special, consequential or other similar damages. This disclaimer of
liability applies to all products, publications and services during and after the warranty period.
This publication may be verified at any time by contacting ADC's Technical Assistance Center at 1-800-366-3891, extension 73475
(in U.S.A. or Canada) or 952-917-3475 (outside U.S.A. and Canada), or by e-mail to connectivity_tac@adc.com.
ADC Telecommunications, Inc.
P.O. Box 1101, Minneapolis, Minnesota 55440-1101
In U.S.A. and Canada: 1-800-366-3891
Outside U.S.A. and Canada: (952) 938-8080
Fax: (952) 917-1717
Page ii
DATE
REASON FOR CHANGE
Original.
Updated to include warning and caution statements and modification procedure for 240 VAC operation.
Updated to include F-type signal connector, changed format.
Updated to describe new logic for alarms (single failure closes alarm contacts).
Advertisement
Table of Contents
