1. Manuals
  2. Brands
  3. Firephant Manuals
  4. Smoke Alarm
  5. SA800
  6. User manual

Firephant SA800 User Manual

Hide thumbs Also See for SA800:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual

SMOKE ALARM

BRANDVARNARE
PALOVAROITIN
USER MANUAL
RØYKVARSLER
RØGALARM
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SA800 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Firephant SA800

  • Page 1: Smoke Alarm

    USER MANUAL SMOKE ALARM BRANDVARNARE RØYKVARSLER PALOVAROITIN RØGALARM...
  • Page 2 ENGLISH SMOKE ALARM FEATURES MODEL: SA800 » Optical smoke alarm » High sensitivity and stability » Test and pause function Congratulations on the purchase of your » LED diode indicates normal operation new smoke alarms. We recommend » Low battery warning...

  • Page 3: Important Safety Information

    IMPORTANT SAFETY INFORMATION 1. The smoke alarm is battery-powered. non-residential buildings. The smoke alarm The smoke alarm will not work without bat- is not a replacement for a complete alarm system as required under law or by the fire teries, or if the batteries are dead, removed safety authorities.

  • Page 4: Positioning The Smoke Alarm

    POSITIONING THE SMOKE ALARM 50 cm Minimal protection Recommended/more substantial protection Smoke alarms with a pause function are recommended 100 cm Multi-story residence Single-story residence, apartment For the smoke alarm to give an early warning, it needs to be installed where the fire occurs.

  • Page 5: Protect Your Hearing

    SMOKE ALARMS SHOULD NOT BE PLACED IN THE FOLLOWING LOCATIONS » In the kitchen, near the cooker, where smoke from cooking could cause false alarms. » In areas of high air humidity, such as bathrooms or near dishwashers or washing machi- nes, where steam and moisture could cause false alarms.

  • Page 6: How To Install Your Smoke Alarm

    HOW TO INSTALL YOUR SMOKE ALARM 1. Remove the mounting plate on the back of the smoke alarm by twisting it counter clockwise. 2. Install the mounting plate in the chosen position on the ceiling. Take care to posi- tion your smoke alarm properly. 3.
  • Page 7 MEANING OF THE DIFFERENT LED AND ALARM SIGNALS MODE SOUNDER Normal 1 flash every 344 second Test beep 0.5 sec, av 0.5 sec, Flashes rapidly beep 0.5 sec, av 0.5 sec and so on Alarm beep 0.5 sec, av 0.5 sec, Flashes rapidly beep 0.5 sec, av 0.5 sec and so on...
  • Page 8 Cause of error Action Steam and moisture. Place the smoke alarm at least 2 metres from any A false alarm may bathroom, laundry room, or other location where occur if the smoke alarm is placed too close to a high air humidity may occur. bathroom, laundry room, or other location with high air humidity.

  • Page 9: Testing The Smoke Alarm

    TESTING THE SMOKE ALARM Test your smoke alarm by pressing down the test button and hold it for 5 seconds, then release. » Always test all alarms after installation to ensure that they are functioning properly. » The test button performs a full test of all functions. Never use a naked flame to test the smoke alarm, since this can destroy the alarm.

  • Page 10: Replacing The Battery

    REPLACING THE BATTERY How often the battery needs replacing depends on the type of battery. It is recommended that you replace batteries routinely once a year, preferably on a particular date. Alternatively, re- place the battery when the smoke alarm emits the low battery signal (short audible signal and flash LED every 43 seconds).

  • Page 11: Troubleshooting

    2. Change the location of the smoke alarm. See section on false alarms. WARRANTY GPBM Nordic AB hereby declares that Housegard model SA800 complies with the This smoke alarm comes with a 5-year essential requirements and other relevant limited warranty against manufacturing provisions of Directive 89/106/CEE.

Table of Contents