Connecting Your Phone To A Computer - AT&T ADS1 Manual

Connecting Your Phone to a Computer

1. Connect your phone to your computer using the supplied USB cable.
Charge : Select this option if you only want to charge the battery while your phone is connected to your computer.
USB Mass storage : This mode is available only when a microSD card is inserted into the slot of your phone.
Select this mode when you want to copy files between your phone's microSD card and your computer.
While your phone is connected to a computer, USB Mass storage mode does not enable you to use apps on your phone
by accessing the microSD card.
USB tethering : When you do not have Internet connection on your computer, you can select this mode to share the
mobile data connection of your phone with your computer with your computer.
Copying files to/from the microSD card
You can copy your music, photos, and other files to the microSD card of your phone.
1. Connect your phone to your computer using the supplied USB cable.
2. On the Connect to PC screen, tap
On your computer, the connected phone is recognized as a removable disk.
3. Navigate to the removable disk and open it.
4. Do one of the following:
Copy the files from the computer to the microSD card's root folder of your phone.
Copy the files from the phone's microSD card to a folder in your computer.
5. After copying the files, unmount the removable disk (that is, the connected phone) as required by your computer's
operating system to safely remove your phone.
6. Do one of the following:
Disconnect the phone from the computer.
If you want to keep the phone being connected to the computer, but want the phone to be able to access the storage
card, open the Notifications panel, and tap
USB Mass storage > Done.
USB Mass storage
33
to select an option except USB Mass storage > Done.