Technicolor TG213 User Manual page 29

Home Network
Properties
Channel
802.11 Mode
Channel Width
After modifying any of the above properties, click Apply to save and apply changes.
Security
The Security page allows you to configure the authentication and password settings
of your device to protect it from unauthorized access.
Properties
2.4g Security
Authentication Type
Power Wall Plug Repeater
Description
If AutoChannel is not selected, you may select the Channel
from this box.
Limit the type of wireless clients that can connect to your
device by selecting the 802.11 protocol.
Select the channel width.
Description
To protect your device from unauthorized access, select and
configure the authentication type that connecting devices
must use to connect to the 2.4Ghz band.
•
Disable: Select if you will not require authentication to
connect to your device.
•
WEP: Select if you wish to use the WEP security for
authentication. Select WEP, Mode, and WEP Key, and
then type the Key on the allotted box. Connecting
devices must enter the correct WEP key to establish
connection.
•
WPA/WPA-2Personal: Select if you wish to use the
WPA/WPA-2 security for authentication. Then, type the
Passphrase on the allotted boxes. Connecting devices
must enter the correct WPA/WPA-2 passphrase to
establish connection.
29