Table of Contents
Advertisement
5-5.
If you do not hear a dial tone or the dial tone is distorted adjust the configuration switch until
the dial tone sounds normal.
Note
Multiple settings might work with your phone; however, only one is the optimal position.
6. Making a test Call with Desk Phone
6-1.
Remove handset from desk phone cradle.
6-2.
With your headset on, press the call control button on the headset.
6-3.
Dial the number using your desk phone.
6-4.
Adjust the master speaking volume on base to the best setting for your listener. A setting of
3 or 4 is ideal.
6-5.
Adjust the master listening volume on base. A setting of 2 or 3 is ideal.
6-6.
You can fine tune the listening volume on the headset.
6-7.
To end the test call, press the call control button on the headset and replace the handset
into the desk phone cradle.
7. Connecting to the PC
7-1.
Connect the USB cable to the USB port on the back of the base.
7-2.
Connect the other end of the USB cable to the USB port on the PC.
7-3.
Insert the AudioCentral Software/Interactive User Guide CD and download the AudioCentral
software from the Wizard. Follow the installation instructions shown on your PC.
8. Making a test Call with PC
8-1
Ensure the AudioCentral software is running on your PC.
8-2
With your headset on, press the PC talk button on the base.
8-3
Dial the number using your softphone application.
8-4
Adjust listening and speaking volume using your softphone application and/or "sound and
audio devices" in your PC control panel.
8-5
You can fine tune the listening volume on the headset.
8-6
To end the test call, press the call control button on the headset.
Please refer to the printable user guide located on the AudioCentral Software/Interactive User Guide
CD for further details on how to use your Versa VS21M Professional Wireless Headset System.
Advertisement
Table of Contents
