Table of Contents
Advertisement
Adapter Properties Screen
FIGURE 3-2
6.
Use the arrow keys to navigate to the Advanced Adapter Properties field, and
press Enter.
The Advanced Adapter Properties screen is displayed.
7.
Navigate to the Maximum INT 13 Devices for this Adapter field and press Enter to
change the field value from
This field specifies the number of devices that the HBA will export to the system BIOS
for boot. Changing the value to a low number (such as a value of 1 or 2) simplifies boot
maintenance.
8.
Press Enter to save your changes and press the Esc key twice to return to the
Adapter Properties screen.
9.
To view the devices and logical volumes attached to the HBA, use the arrow keys
to navigate to the SAS Topology field, and press Enter.
The SAS Topology screen is displayed (see
To Prepare to Use the BIOS Configuration Utility
to the value of
or
0
1
Figure
3-3).
Chapter 3 • Creating a Bootable Drive in a Preboot Environment
.
2
31
Advertisement
Table of Contents
