Using Wi-Fi Direct - Zte Blade V8 LIite User Manual

on in sleep mode.
MAC address: Check the MAC address.

IPv4 address: Check the phone's IP address.

3. Touch Back.
4. Touch to adjust the following settings.
WPS Push Button: Connect to a WPS network via the

push button method.
WPS Pin Entry: Connect to a WPS network via the

phone PIN method.
Wi-Fi Direct: Use the Wi-Fi Direct feature. See

Wi-Fi Direct
5. Touch Back.
> Advanced to set Install certificates. Install
6. Touch
certificates needed for connecting to certain Wi-Fi networks.

Using Wi-Fi Direct

Wi-Fi Direct allows Wi-Fi devices to share files and data directly
by connecting to each other without the need for wireless access
points (hotspots).
To connect via Wi-Fi Direct:
1. Touch
2. If Wi-Fi is off, slide the Wi-Fi switch to turn it on.
3. Touch > Wi-Fi Direct. Your phone will search for other
devices enabled with Wi-Fi Direct connections.
® .
> Settings > Wi-Fi.
®
61
Using