Bluetooth® Mode - Chrysler Uconnect 5.0 2015 Owner's Manual Supplement

18 MEDIA MODE
Inserting Auxiliary Device
Gently insert the Auxiliary device cable into the AUX
Port. If you insert a Auxiliary device with the ignition
ON, the unit will switch to AUX mode and begin to play
when you insert the device cable.
Controlling The Auxiliary Device
The control of the Auxiliary device (e.g., selecting play-
lists, play, fast forward, etc.) cannot be provided by the
radio; use the device controls instead. Adjust the volume
with the VOLUME/MUTE rotary knob, or with the
volume of the attached device.
The vehicle radio unit is acting as the amplifier for audio
output from the Auxiliary device. Therefore if the volume
control on the Auxiliary device is set too low, there will be
insufficient audio signal for the radio unit to play the
music on the device.
Bluetooth® Mode
Bluetooth® Streaming Audio (BTSA) or Bluetooth®
Mode is entered by pairing a Bluetooth® device contain-
ing music to the Uconnect® system.
Before proceeding, the Bluetooth® device must be paired
with the Uconnect® Phone to communicate with the
Uconnect® system.
See the "Pairing Procedure" in this manual for further
details.
Once the Bluetooth® device is paired to the Uconnect®
system, push the MEDIA button located on the left side
of the display. Once in Media Mode, press the "Source"
button on the touchscreen and select "Bluetooth."
NOTE: For mobile phone compatibility and pairing
instructions, please visit UconnectPhone.com.