Clock Setting - Chrysler Uconnect 5.0 2015 Owner's Manual Supplement

12 RADIO MODE
• Balance/Fade — Press the "Balance/Fade" button on
the touchscreen to adjust the sound from the speakers.
Use the "arrow" button on the touchscreen to adjust the
sound level from the front and rear or right and left side
speakers. Press the Center "C" button on the touch-
screen to reset the balance and fade to the factory
setting. Press the "Back Arrow" button on the touch-
screen when done.
• Speed Adjustable — Press the "Speed Adjusted
Volume" button on the touchscreen to select between
OFF, 1, 2 or 3. This will decrease the radio volume
relative to a decrease in vehicle speed. Press the
"Back Arrow" button on the touchscreen when done.
• Loudness — Press the "Loudness" button on the
touchscreen to select the Loudness feature. When
this feature is activated it improves sound quality at
lower volumes.

Clock Setting

1. If a SETTINGS button on the right side of faceplate
exists, push this button. If not, push the MORE button
on the faceplate then the "Settings" button on the
touchscreen.
2. Select the "Clock and Date" button on the touchscreen.
3. Next, select "Set Time" to change the time.
4. Select "Set Date" to change the date.
5. To set the time, select the "Seek Up"
Down" arrows as appropriate. Select "12 hrs vs
24 hrs", "AM" or "PM" or select the "Time Zones" (if
equipped).
6. Select "Done" when complete.
or "Seek