Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Trotec PTNS 10-230V
Summary of Contents for Trotec PTNS 10-230V
- Page 1 PTNS 10-230V OPERATING MANUAL TACKER...
-
Page 2: Table Of Contents
Follow the manual Information marked with this symbol indicates that the operating manual must be observed. Wear ear protection Information marked with this symbol indicates that you should wear hearing protection. Operating manual – tacker PTNS 10-230V... -
Page 3: Safety
• Keep children and bystanders away while operating a drugs, alcohol or medication. A moment of inattention power tool. Distractions can cause you to lose control. while operating power tools may result in serious personal injury. Operating manual – tacker PTNS 10-230V... - Page 4 Use of the power tool for operations different from those intended could result in a hazardous situation. Operating manual – tacker PTNS 10-230V...
- Page 5 Make sure that no water or other liquids can softwood or material similar to wood whilst adhering to the enter the housing. technical data. We recommend using the power tool with original Trotec Warning accessories. Do not process materials containing asbestos.
-
Page 6: Information About The Device
The magazine can accommodate up to 100 staples of type 53 or 50 wire nails of type 47. Device depiction Designation Start lock Trigger Magazine release Magazine filling level indicator Orifice Magazine slider Wire nails Staples Operating manual – tacker PTNS 10-230V... -
Page 7: Transport And Storage
EN 60745 and can be used for a device comparison. The specified vibration emission value may also be used for a preliminary assessment of the exposure. Operating manual – tacker PTNS 10-230V... -
Page 8: Start-Up
Info At the magazine filling level indicator you can check whether any staples or wire nails are left in the magazine. Info Do not open or close the magazine by force (e.g. for filling). Operating manual – tacker PTNS 10-230V... -
Page 9: Operation
ð The wire nail or staple is injected into the workpiece. 4. Having driven the staple or wire nail in all the way, release 1. Insert the mains plug into a properly secured mains socket. the trigger and withdraw the device from the workpiece. Operating manual – tacker PTNS 10-230V... -
Page 10: Errors And Faults
Only then switch the device back on. Your device still does not operate correctly after these checks? Please contact the customer service. If necessary, bring the device to an authorized specialist electrical company or to Trotec for repair. Operating manual – tacker PTNS 10-230V... -
Page 11: Maintenance
• Dry the device with a soft, lint-free cloth. • Keep the ventilation openings free from dust deposits to prevent overheating of the motor. Operating manual – tacker PTNS 10-230V... - Page 12 Trotec GmbH & Co. KG Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...