Kalorik SB 36580 User Manual page 7

 If necessary, first clean your shoes with a soft damp cloth (to
remove the large residues on top of your shoes) and let them dry
thoroughly.
 Use the hard cleaning brush for the first polishing. To do so, press the
ON / OFF switch and press the shoe slightly against the hard brush.
 To polish, apply liquid wax on the shoe, pressing once or twice
(according to the type of wax) on the inferior part of the liquid wax
container with the shoe to be polished (alternatively, it is also
possible to apply the shoe polish/cream/wax of your choice
manually on the shoe, and use the appliance for the polishing).
 To polish your shoes, gently press your shoe against one of both soft
polishing brushes.
 If using both colorless and dark colored polish, reserve one polishing
brush for the light colored shoes, and the other for the dark colored
shoes.
 Once your shoes are polished and shined, switch off the appliance
by pressing the ON / OFF switch.
CLEANING
Unplug the appliance and let it cool down.

Clean the outside only with a dry cloth.

NEVER USE THE APPLIANCE NEAR WATER; NEVER IMMERSE IT IN

WATER OR IN ANY OTHER LIQUID.
You can remove the rubber foot rest to clean it with water. Make

sure it is dry before you put it back into place correctly.
Any damage caused by a use which does not conform to these

instructions will exclude any liability.
LIQUID WAX REORDER
For any liquid wax order, or replacement brushes, please contact the
Kalorik after sales service, whose address is specified in the Warranty
section of this user manual.
www.KALORIK.com
7
SB 36580 - 170120