RF power loss at the operating frequencies of this system. FOR ALL BMS TRANSMITTERS – Operation of a BMS transmitter product generally requires a license. It is the responsibility of the user to obtain all required operating licenses.
Any revision will be done by a complete reissue. Additional copies of this manual can be ordered from BMS. The equipment should only be passed on to a third party together with the relevant documentation. For further information please visit our website at www.bms-inc.com.
(3) Select Button Figure 1. Transmitter control panel Using the transmitter When the transmitter is powered on, the display will show the letters, BMS; then, once the bootup is completed, the frequency and current channel will appear. 2350.000 CH 1...
If the display OFF time is set to a value between 15 seconds and 240 seconds, the display will turn off after that time. To “wake up” the display you must slide your finger from the display to the BMS logo, pressing all three buttons along the way.
NTxx23SDHD Camera-back Transmitter Operation Manual Figure 3. Waking up the unit’s display Inputs and outputs 75 Ω BNC (f) Video in SDI; HD-SDI 75 Ω BNC (f) Video in CVBS 4pol Hirose (f) Audio in 2x Analog audio in Line or Mic Level Audio R+ Audio L+ n.c.
Temperature - 10° C to + 50° C (-4° F to +122°F) Relative Humidity 5 % to 95 % Dimensions (W x D x H) NT5723SDHD without brackets: 158 x 80 x 46 mm (6.22“x3.14“x1.81“) Weight 390g (0.86 lbs) 1.5.1...
Page 10
• This device must accept any interference received, including interference that may cause undesired operation. Modifications (FCC 15.21) Changes or modifications to this equipment not expressly approved by BMS may void the user’s authority to operate this equipment. Broadcast Microwave Services...
NTxx23SDHD Camera-back Transmitter Operation Manual 2 PREVENTIVE MAINTENANCE There are no preventive maintenance procedures for this product. Broadcast Microwave Services...
When the malfunction is determined to be user responsibility, repair will be initiated after confirmation with the user’s buying authority. BMS warrants that, at time of delivery, the product will be free from defects in materials and workmanship provided the equipment or system is installed, operated and maintained in accordance with the Operation and Maintenance manual or such other BMS documentation as may be applicable.
Broadcast Microwave Services Europe GmbH Schwalbacher Str. 12 65321 Heidenrod Germany Tel: +49-6124-72 39-00 • Fax: +49-6124-72 39-29 Web: www.broadcastmicrowave.com E-mail: saleseurope@bms-inc.com Please send feedback on this and other BMS manuals to techpubs@bms-inc.com. Register for BMS customer portal at www.broadcastmicrowave.com/support/index.php?action=user. Broadcast Microwave Services...
Need help?
Do you have a question about the NT5723SDHD and is the answer not in the manual?
Questions and answers