Page 1
Prof Install Guide for M900S Access Point and Subscriber Unit M900S™ Wireless Broadband System PROFESSIONAL INSTALLATION GUIDE M900S-AP and M900S-SU [draft]...
Prof Install Guide for M900S Access Point and Subscriber Unit 1. Overview This manual covers configuration and installation of the optional external antennas for use with the M900S Access Point M900S-AP and Subscriber Unit M900S-SU. Since this device requires manual power limit settings for use with the higher gain antennas, it is classified by the FCC as a professional install device.
<max power in dBm> The flash memory must be updated after running the command. The command must be run on the M900S-AP or M900S-SU (via telnet or serial port session) prior to installing the antenna and while the Opmode is OFF.
BOLTS FOR MOUNTING TO WALL NOT SUPPLIED Please see the M900S User Manual for instruction on grounding and weatherproofing the installation. In addition to the guidelines listed in the User Manual, installers must cover cable-SMA connector with heat shrink tubing to provide...
Page 5
Prof Install Guide for M900S Access Point and Subscriber Unit Yagi Antenna To install the Cushcraft Yagi PN # PC9013N antenna please see the drawing below Add Drawing of antenna mounting Omni Antenna To install the Comtelco PN #BS915XL7 antenna, please follow the instructions below. These antennas recommended for access points only, but may be used with subscriber units.
Need help?
Do you have a question about the M900S and is the answer not in the manual?
Questions and answers