Product Overview; Replacing The Fuse - Chauvet EPIX DRIVE 900 Quick Reference Manual

ÉPIX Drive 900 QRG
Product
Overview
AC Power
Power Linking
AC Plug
Replacing The
Fuse
Rack
Ears
Power
In
This product has an auto-ranging power supply that can work with an input voltage
range of 100–240 VAC, 50/60 Hz.
You can link up to 6 ÉPIX Drive 900 products at 120 V, 11 products at 208 V, or 12
products at 230 V. Never exceed this number. Power linking cords can be purchased
separately.
Connection
AC Live
AC Neutral
AC Ground
To eliminate unnecessary wear and improve its lifespan, during periods of
non-use completely disconnect the product from power via breaker or by
unplugging it.
1. Disconnect this product from power.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove blown fuse and replace with a good fuse of the same type and rating.
4. Screw the fuse holder cap back in place and reconnect power.
Power
Out
Fuse
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow Green/Yellow
3
OLED
Control
Panel
M12
Mounting
Point
ÉPIX Tour
Products
Output
Signal Data
In/Out
Screw Color
Brown Yellow/Brass
Blue Silver
Green
EN
Rubber
Feet