Operation; Technical Specifications - Radio Shack 19-1208 Owner's Manual

6. When the QUIET channel is selected, press QUIET key to confirm and exit the QUIET
setting mode.
7. Repeat step 1 to 6 to set up other channel, total of 8 channels can be set up.
8. When all channels are selected, press FUNC key or no key entry for 5 seconds to
confirm and exit the channel set-up mode.
Note:
1. When setting the channels, the user may omit the steps of 4-6, and the channels are
set without QUIET codes.
2. When total 8 channels are already set up, user should OF one channel before setting
another channel. Otherwise, press PTT to select the desired channel will not succeed
and a beep sound will be heard.
To reset the unit, press and hold the QUIET key and turn on the unit. Reset operation will
clean all the set channels and restore the current channel to CH2 without QUIET code.
C. OPERATION
1. Please charge the battery pack with the supplied charger.
Ni-Cd batteries must be charged for a minimum of 10 hours before initial use.
2. Turn VOL control knob to the unit "on". Turn the SQL knob counterclockwise to the end,
and adjust the volume to a normal listening level.
3. Turn SQL knob clockwise until background noise is just quieted.
4. Select the desired channel and/or QUIET privacy code.
5. Press Push-To-Talk button to transmit.
6. To receive, simply release Push-To-Talk button.
Note : You can only communicate with another radio that is using the same channel and/or
the same QUIET privacy code as your radio.

TECHNICAL SPECIFICATIONS

10