For Your Convenience; Programming A Function Key - Philips SOPHO IPC 100 User Manual

For Your Convenience

Programming a Function Key

Programmable Function Keys can be assigned as Appearance Keys (e.g. Trunks) or General Keys (e.g.
DSS/One-Touch). Press the Function Key to activate the assigned function without dialling the Service Code.
General Key Code
CALL
8
An existing Appearance Key cannot be overwritten without the Appearance Key first being erased.
Programmable Function Keys (General Key Code) can be erased by entering Service Code 00.
Common Service Codes:
01 DSS/One-Touch Key
03 DND Key
04 Background Music (ON/OFF)
Headset Key
08 Incoming Caller ID List
19 External Zone Paging
20
External All Call Paging
21 Internal Zone Paging
22
Internal All Call Paging
27 Abbreviated Dial – Common/Personal
28 Abbreviated Dial – Group
85 Directory Dialling
Programming a DSS/One-Touch Key
Programmable Function Keys can be assigned as DSS (Direct Station Selection) or One-Touch Keys. You can
place an Outside or Intercom call by pressing this key without dialling the number.
CALL
Trunk Telephone Number
9
Extension Number
?
Function Keys with one or two colour LEDs programmed as DSS keys will provide extension status
indication, Idle=Off, Busy=lit. This is known as Busy Lamp Field (BLF) indication.
When storing an outside telephone number, the Trunk Access Code (normally 9) must be added to the
start of the number. Up to 36 digits can be stored.
To program another key, press the next Programmable Function Key instead of the SPK Key to finish.
Function Key
5
1
8 5
1
? ?
? ?
Service
Code
? ?
10 Call Forward – Immediate
11 Call Forward – Busy
12
13 Call Forward – Busy/No Answer
14 Call Forward – Dual Ring
15 Call Forward – Follow Me
16
Call Forward – Select Option
17 Call Forward – Device
29
Repeat Redial
30 Saved Number Redial
31 Memo Dial
Function Key
0
HOLD SPK
2
Additional Data
?
1
SPK