Changing Your Device Name; Zero Level Calibration; Basic Operation - Savvy SavvyLevel User Manual

Changing your device name

You can further customize your SavvyLevel device by changing its Bluetooth broadcast name. This
can help you identify it when you have many listed Bluetooth devices.
1. Select Security in the main menu and then select Change Device Name. You will see the
Device Name screen. See Figure 4.
2. Enter a new name. You may enter up to 11 numbers or characters (alphanumeric).
Characters maybe upper or lower case. Special characters are not accepted but with
exception to the space and underscore characters.
7

Zero Level Calibration

Zero level calibration only needs to be performed once after the
SavvyLevel device is first installed. It uses sophisticated thermally
compensated algorithms to achieve unprecedented precision over a
wide range of operating temperatures.
For best results calibration should be performed at median
temperatures around 25°C (77°F), with the SavvyLevel device
temperature stabilized.
To calibrate:
1. Place your caravan/RV/4WD or trailer on level ground or at
its preferred level for comfortable use.
2. Make sure your SavvyLevel device is powered.
Select Settings in the main menu and then select Zero Scale. Press
OK to complete the action. See Figure 5 and 6.
8

Basic Operation

4
5
2
Figure 7
4
Figure 5
Figure 6
1
3
6