Advertisement
Quick Links
333 Twin Dolphin Drive, 6
th
Redwood Shores, CA 94065
kensington.com
K72448 Presentair Pro™ Bluetooth® Presenter, Laser, & Stylus FAQ's
What should I do once I purchase this device?
After opening the box and removing the presenter and its accessories, please take a
moment to read the Quick Start Guide and the Instruction Guide before starting to use
the presenter.
For first-time use, please install the provided battery into the presenter.
What devices are compatible with PresentAir Pro?
The PresentAir Pro works with most Windows 8, Android, and iOS devices that are
Bluetooth 4.0 compatible.
How can I know that the device is connected to my tablet or laptop after pairing?
When you have completed the steps in the Instruction Guide for pairing/connecting
PresentAir Pro to your device, you can find the PresentAir Pro in the Bluetooth settings
list of connected/paired devices.
-
Windows 8
o PC settings -> PC and Devices -> Bluetooth
o PresentAir will show as Presentair XXXX with the status: Connected
-
iOS
o Settings -> Bluetooth -> My Devices
o PresentAir will show as Presentair XXXX with the status: Connected
-
Android
o Settings -> Bluetooth -> Paired Devices
o PresentAir will show up as PresentAir XXXX with the status: Paired
I was able to connect to a Bluetooth device, but I cannot connect to a different one.
What should I do?
When a PresentAir Pro has been paired with a device, it cannot be paired with a new
device until it has been unpaired/disconnected from the previous device. Go to your
device's Bluetooth settings, find the PresentAir under the Connected/Paired devices
and select disconnect/forget/unpair.
How do I know when the device is in Pairing/OFF/ON mode?
1. If you press one of the 3 input buttons (up, middle, down) and one of the LEDs
flash, PresentAir Pro is in the ON state.
Floor
Advertisement
Related Manuals for Kensington Presentair Pro K72448
Summary of Contents for Kensington Presentair Pro K72448
- Page 1 333 Twin Dolphin Drive, 6 Floor Redwood Shores, CA 94065 kensington.com K72448 Presentair Pro™ Bluetooth® Presenter, Laser, & Stylus FAQ’s What should I do once I purchase this device? After opening the box and removing the presenter and its accessories, please take a moment to read the Quick Start Guide and the Instruction Guide before starting to use the presenter.
- Page 2 333 Twin Dolphin Drive, 6 Floor Redwood Shores, CA 94065 kensington.com 2. If you press one of the 3 input buttons (up, middle, down) and none of the LEDs flash, PresentAir Pro is in the OFF state. Pressing the mode button or laser button will wake the PresentAir Pro to enter the ON state.
- Page 3 333 Twin Dolphin Drive, 6 Floor Redwood Shores, CA 94065 kensington.com What should I do when the Bluetooth Devices in Windows doesn’t find the device or cannot connect to it? Find the Bluetooth Icon in the lower right corner of the desktop, Right Click the icon and select Open Settings.
- Page 4 333 Twin Dolphin Drive, 6 Floor Redwood Shores, CA 94065 kensington.com The device still does not seem to pair correctly in Windows. What is going on? There are a few settings in Windows that can influence pairing. First, check that Bluetooth Services are set to start Automatically on start-up.
- Page 5 333 Twin Dolphin Drive, 6 Floor Redwood Shores, CA 94065 kensington.com Locate all Bluetooth Services and verify they are set to Automatic. In some cases there is more than one Bluetooth Service listed, be sure to set all shown to Automatic. To...
- Page 6 333 Twin Dolphin Drive, 6 Floor Redwood Shores, CA 94065 kensington.com change the setting, right click the Bluetooth Service, select Properties. Select start-up type to Automatic, see below: Select Apply, and OK. If all Bluetooth Services are set to Automatic, reboot your computer to complete the change.
- Page 7 333 Twin Dolphin Drive, 6 Floor Redwood Shores, CA 94065 kensington.com From the Properties, select Power Management and uncheck ‘Allow the computer to turn off this device’. Note: your device may need to be paired for this option to be...
- Page 8 333 Twin Dolphin Drive, 6 Floor Redwood Shores, CA 94065 kensington.com 2. The second setting is for the Bluetooth radio. Check to see that the Power Management setting for Bluetooth does not allow Windows to turn off Bluetooth to save power. Note: there are two ways to find the second setting.
- Page 9 333 Twin Dolphin Drive, 6 Floor Redwood Shores, CA 94065 kensington.com Select the Radio Adapter from the list, right click the Radio Adapter and then select Properties. Find the Bluetooth Driver, Right Click the Driver and select Properties.
- Page 10 333 Twin Dolphin Drive, 6 Floor Redwood Shores, CA 94065 kensington.com Click the Power Management Tab, and uncheck ‘Allow the computer to turn off this device to save power’. If available, check ‘Allow this device to wake computer’. See below:...
- Page 11 333 Twin Dolphin Drive, 6 Floor Redwood Shores, CA 94065 kensington.com The second way to find this setting is to locate the Bluetooth Icon in the lower right corner of your screen, Right Click the icon and select Open Settings. Select the...
- Page 12 333 Twin Dolphin Drive, 6 Floor Redwood Shores, CA 94065 kensington.com Select the Power Management Tab, and uncheck ‘Allow the computer to turn off this device to save power’. See below: Click OK, and reboot your computer. How do I know when I need to change the battery? When the PresentAir Pro battery is low, the red LED will blink every 15 seconds.
- Page 13 What if my device stops working and is not responsive to any button press? First, if you’re using the PresenterWorks app, tap on the ‘Kensington’ button for Windows and iOS, or the ‘Help’ button for Android, and select ‘Forget PresentAir Pro’.
Need help?
Do you have a question about the Presentair Pro K72448 and is the answer not in the manual?
Questions and answers