WARNING Indicates a hazardous Atlas Copco has a strong global sales and service situation which, if not avoided, network, consisting of customer centers and could result in death or distributors worldwide. Our experts are highly serious injury.
Safety and operating instructions LP 13-30 P No person who is under the influence of drugs, Never use the machine near flammable ► ► alcohol or medication may operate the materials, fumes or dust. machine. Make sure that there are no undetected ►...
Page 7
LP 13-30 P Safety and operating instructions instructions. Incorrect selection or lack of WARNING Dust and fume hazard maintenance of consumables/ inserted tools/ Dusts and/or fumes generated or dispersed when other accessories may cause an unnecessary using the machine may cause serious and increase in dust or fumes.
Safety and operating instructions LP 13-30 P Always make sure that no hose or other object ► DANGER Fire hazard is in your way or in any other person's way. If a fire starts in the machine, it can cause injury.
No other use is permitted. LP 13-30 P is fitted with an air cooled 13 HP Honda petrol engine with hydraulic POD system (power on demand). LP 13-30 P provides a oil flow of 20-30 l.p.m. (5-8 US gal/min).
Safety and operating instructions LP 13-30 P Main parts F. Engine oil, dipstick G. Ignition switch OFF and ON H. Fuel tap LP 13-30 P I. Oil cooler J. Hydraulic pump K. Choke control L. Recoil start M. Pressure relief valve N.
LP 13-30 P Safety and operating instructions delivered with the machine for more Fuel label information. G. Year of manufacture. H. Maximum nominal operating pressure Noise level label Lifting point label The label indicates the guaranteed noise level corresponding to EC-directive 2000/14/EC. See "Technical data"...
Safety and operating instructions LP 13-30 P Hydraulic oil The by-pass valve (C) must be in the OFF position when starting and in the ON position when using the machine. In order to protect the environment, use of Connectors (G) and (H) are used to connect the...
LP 13-30 P Safety and operating instructions Check the hydraulic system To set or check the hydraulic oil flow and the pressure relief valve, we recommend using the Atlas Copco test equipment or similar test equipment. ◆ 0-250 bar (0-3600 psi) ◆...
Safety and operating instructions LP 13-30 P ◆ Transport Check the hydraulic oil level and add as necessary. ◆ Check the engine oil level and add oil as necessary. ◆ Make sure the fuel filler cap is tightly closed. ◆...
LP 13-30 P Safety and operating instructions Maintenance Regular maintenance is a basic requirement for the continued safe and efficient use of the machine. Follow the maintenance instructions carefully. ◆ Before starting maintenance on the machine, clean it in order to avoid exposure to hazardous substances.
Safety and operating instructions LP 13-30 P ◆ The engine oil should be replaced after the first 8 hours of operation and thereafter in accordance with the maintenance schedule in the engine manufacturer's operating and maintenance instructions. Check hydraulic oil filter...
LP 13-30 P Safety and operating instructions Troubleshooting Troubleshooting Problem Cause Solution Engine turns over but does not start No fuel Top up tank (Fuel) Fuel line blocked Clear line Fuel tap in position OFF Turn tap to position ON...
Safety and operating instructions LP 13-30 P Storage ◆ Empty the tank before storing the machine. ◆ Check that the machine is properly cleaned before putting it away for storage. ◆ Store the machine in a dry place. ◆ We recommend to store the machine in a standing position.
LP 13-30 P Safety and operating instructions Technical data Machine data LP 13-30 P Height, mm (in.) 705 (27.7) Width, mm (in.) 600 (23.6) Length, mm (in.) 745 (29.3) Temperature range, °C (°F) -20 to 40 (-4 to 104) Weight including oil, kg (lb) 91 (200 ) Flow, l.p.m.
LP 13-30 P Safety and operating instructions EC Declaration of Conformity EC Declaration of Conformity (EC Directive 2006/42/EC) We, Construction Tools EOOD, hereby declare that the machines listed below conform to the provisions of EC Directive 2006/42/EC (Machinery Directive) and 2000/14/EC (Noise Directive), and the harmonised standards mentioned below.
Page 24
Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. www.atlascopco.com...
Need help?
Do you have a question about the LP 13-30 P and is the answer not in the manual?
Questions and answers