Hyundai MB-1200 User Manual page 34

A. Call Waiting
1) Interrogate: This function is used to inquire the network of the current
status that your phone is in.
2) Activate: When the call waiting function is turned on, the phone will
contact the network. After a short while break, the network will make a
response, and forward a message to corroborate your operation. After
this function is activated, if a third party is calling you during the
conversation, the network will give you a beep alarm, and display the
telephone number of the third party, too.
3) Deactivate: If this function is turned off, the network will not give you
a beep alarm when any third party is calling you during your call
conversation.
B. Call Divert
This network-based function allows an incoming call to be diverted to
another phone you designated.
1) Unconditional Divert: When this function is set at "Activate", all the
incoming calls will be diverted to the destination number. Select
"Activate" or "Deactivate", the phone will contact the network; after a
short while, the network will make a response, and notify the operational
result.
2) Busy Divert: When this function is set at "Activate", all the incoming
calls will be diverted to another phone number when your phone is busy.
Select "Activate" or "Deactivate", the phone will contact the network;
after a short break, the network will make a response, and notify you of
the operational result.
3) No Answer Divert: When this function is set at "Activate", if an
incoming call is not answered within the designated period, it will be
diverted to another phone number. Select "Activate" or "Deactivate", the
phone will contact the network; after a short break, the network will
make a response, and notify you of the operational result.
4) No Service Divert: When this function is set at "Activate", and your
34