Advertisement
ADJUSTING THE TRIM SETTINGS ON THE NEPTUNE II DRONE
A
To calibrate the drone back to normal settings, use the Trim settings found below the left
and right throttle stick, icons.
There are the four adjustments you can make to the flight characteristics:
A
Turning: If your drone drifts left or right, press the roll trim button located below the right
directional stick until centered.
B
Forward/Backward Trim: If your drone drifts backward or forward, press the pitch trim
button, located to the right of the right directional stick, until centered.
C
Side to Side: If the Neptune II drone is spinning in circles or drifting in a rotation, press the
right and left rotation, below the left throttle stick, until centered.
Auto Reset: To bring the drone back to a horizontal and stable flight, click the "One Push
Reset" for gyro calibration.
C
A
C
B
C
B
B
A
Advertisement
