Saving The Time Program - Datacolor 9020-0129 Operating Manual

• Select the field "Number of repetitions" and enter the desired number of repetitions. Setting range: 1 to
99, and -1 for infinite. Confirm entry with Confirm icon. The controller returns to the section view.
• Select the field "Start section for repetition" and enter the section number, at which the repetition
should start. Setting range: 1 up to the section before the currently selected section. Confirm entry
with Confirm icon. The controller returns to the section view.

9.7.7 Saving the time program

Section view.
After the all desired values of the program
section have been configured, press the Con-
firm icon to take over the programming.
The controller changes to the program view.
To save the programming it is absolutely required to press the Confirm icon. Otherwise all
settings will be lost! There is no confirmation prompt!
Datacolor CONDITIONER™ (MB2) 06/2017
Section view.
Program view (example: cabinet with lights).
Press the Confirm icon to take over the pro-
gramming.
The controller changes to the Normal display.
page 63/126