SB-01 Important Safety Instructions 1. Read these instructions. 2. Heed warnings. 3. Follow all instructions. 4. Do not use this apparatus near water. 5. Clean only with dry cloth. 6. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Page 3
SB-01 Warning: DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD. • This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. • Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
Page 4
SB-01 6. The unit should not be impeded by covering the ventilation opening with items such as newspaper, table-cloths, curtains etc. Make sure that there are at least 20 cm of space above and at least 5 cm of space on each side of the unit.
Page 5
SB-01 Caution To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture. No user-serviceable parts inside. Refer servicing to quali ed personnel only. Explanation of Graphical Symbols: The lightning ash within an equilateral triangle is intended to...
Page 6
SB-01 • Areas where there is constant vibration. • In Humid or moist places. • Do not place near candles or other naked flames. • Operate the product only as instructed in this manual. • Before turning on the power for the first time, make sure the power adaptor is properly connected.
SB-01 3. “ – “ Button - Press to decrease the volume level. 4. “ + ” Button - Press to increase the volume level. 5. “ ” Button - Press to choose music mode. 6. “ ” Button - Short press to turn on/o the unit.
SB-01 Remote Control : Switch the unit between ON and STANDBY mode. : Press to adjust volume level up. : Press once to return to the beginning of current track or previous track. : Press to adjust volume level down.
SB-01 Precautions Concerning Batteries 1. When the Remote Control is not to be used for a long time (more than a month), remove the battery from the Remote Control to prevent it from leaking. 2. If the batteries leak, wipe away the leakage inside the battery compartment and replace the batteries with new ones.
Page 10
SB-01 • Before connecting the AC power cord, ensure you have completed all other connections. • Connect the mains plug of the main unit to a mains socket. • Ensure all connections are connected before connecting to the mains power socket.
SB-01 Adjust the Volume • Press the +/– button on the main unit or / button on remote control to adjust the volume level. • While adjusting the volume, the LED Display window shows the volume level. The volume range from as low as level 0 to as high as level 32.
Page 12
SB-01 Pair the Speaker 1. If you haven’t paired the speaker with a device, or the paired devices list is empty, pairing mode is activated. 2. Activate Bluetooth on the compatible device, and set it to search for compati- ble devices.
Page 13
SB-01 OPTICAL/COAXIAL (DIGITAL INPUTS) OPERATION 1. Ensure that the unit is well connected to the TV or other audio device via Optical or Coaxial cables (not included). 2. While in Power On mode, press the button on main unit or the MODE button on remote control repeatedly to select the relevant OPTICAL or COAXIAL mode.
Page 14
SB-01 USB PLAYBACK This Soundbar has also been developed in line with the latest technical advances in the USB led. The wide range of di erent USB storage devices of all types which are currently on the market, unfortunately do not allow us to guarantee full compatibility with all USB storage devices.
SB-01 Troubleshooting Guide Should you experience di culties in the use of this player, please refer to the following chart. Fault Cause Solution Unit cannot be Unit crashes and Disconnect from the mains for around 5 operated “hangs” seconds. Then switch the unit on again.
SB-01 Speci cations General Power Input.........................100-240V Power Consumption:.........................35 W Standby Power Consumption:....................≤0.5W Output Power (RMS)..................7.5WX2+30W (sub) Frequency Response:....................40Hz-20KHz Power of Remote Control........1 xDC 3V CR2032 button cell (included) Remote Control Distance................up to 6m (Angle≤30°) Protection Class:..........................II Unit Size:........................500x346x52mm Net Weight:........................approx. 4.5kg Working Temperature ......................0-35°C...
Need help?
Do you have a question about the SB-01 and is the answer not in the manual?
Questions and answers