Advertisement
Working principle
A signal system is composed of at least one transmitter and one receiver. When a
person presses the bell button, the signal is converted into radio-frequency pulses.
Those radio-frequency pulses (433 Mhz) are transmitted wireless to the flash
receivers or to the Jenile vibrators. Then, they flash/vibrate in green.
Use
Whether your doorbell works correctly, you can see a red LED will light up when you
press the doorbell. If this is not the case, it means that no more battery, so you
must change (C)
C
- Battery 23A 12V
Settings
Your products are already connected to each other. If this is not the case, the
connection is very simple, please look at the setting of the cube flash & Pocket
vibrator.
18
Advertisement
