Table of Contents
Advertisement
1
2
POWER O.C
ON
MMA
TIG
OFF
3
No.
Name of Part
1
Handle
2
Switch
Output
negative
3
electrode
Indicator lamp for
4
power
Indicator lamp for
5
abnormal condition
6
Changeover switch
7
Current adjustment
Interface to welding
8
torch
Control socket for
9
welding torch
Output
positive
10
electrode
11
Fan guard
12
Grounding mark
Waterproof
13
connector
14
Argon interface
IV. Installation and Operation
4
5
6
85
100
60
115
7
45
130
30
145
10
(A)
200
CURRENT
8
9
10
Front (rear) panel
For moving welding machine by operator.
Power switch
Output negative electrode of welding machine, which connects with base
metal by inverted polarity connection method.
Indicating for power ON/OFF
Indicator lamp for abnormal condition is lighted when over-temperature is
happened inside the welder, and the welder is out of work at this point of
time. The welder will restart when the temperature return to normal and the
indicator lamp will be off automatically. Cut off power when it is over
current. The indicator lamp for over current will be off after power on.
Changeover switch for manual/argon arc welding
Adjustment for welding current
Interface to argon arc welding torch
Socket for controlling welding torch
Output positive electrode of welding machine, which connects with welding
torch by inverted polarity connection method, otherwise it connects with work
piece by positive polarity connection method.
Prevent the ingress of debris
To ensure the safety of person, must make sure the bolt is grounded securely.
It is used to fix cable
Argon inlet for argon arc welding
11
12
13
Function Description
- 6 -
14
Advertisement
Table of Contents
