II.
Notice for Safety
Electric shock – may cause serious injury
● Install grounding device according to relevant requirements.
● Do not contact live component or electric welding rodwhile skin is exposed, wearing with wet
gloves or in wet clothes.
● Ensure the insulation among you, ground and work piece.
● Ensure your operating position is safe.
Flue gas – it is harmful to health
● Keep head away from flue gas.
● Operator must use ventilation device or air extraction device to prevent breathing of flue gas
while operate manual metal arc welding or manual argon arc welder.
Arc radiation – may damage your eyes and burn your skin
● Wear appropriate mask, optical filter and protective cloth to protect your eyes and body.
● Protect observer by appropriate mask or curtain.
Fire – welding sparks may cause fire. Ensure there is no inflammable material approach to cutting
area and keep safe.
Noise – excessive noise may damage your hearing.
● Protect your ears by ear muff or other hearing protective device.
● Warn observers that noise may damage their hearing.
Fault – seek professional service for fault.
●
Troubleshoot according to relevant items of this manual while there are difficulties for
installing and operating.
●
If you still not understood after reading or not troubleshoot according to this manual, please
contact your distributor or our service center for professional service immediately.
II. Notice for Safety
IMPORTANT:
● Do not cut off power in order to prevent damage of machine during
welding.
● Turn off control switch for cutting torch in order to ensure
disconnection of cutting torch and base metal to prevent burning
by electric arc before welding.
● It is necessary to install safety protection switch for electric
leakage.
● The labor protection appliances must be approved by department
of state administration of work safety supervision.
● Operator must be with effective qualification "Welding (gas
cutting) operation for metal" for special operation.
● Do not perform operation with electricity for maintenance and
repair of welding machine!
- 2 -