Advertisement
A full suite of detectors solve any task:
Paintings
combiSpot
buzzerSpot
seismic/
As combispot
magnetic
but with
sensor e.g.
built-in
for paintings.
buzzer.
HOW TO CONNECT ALARM UNITS AND REMOTE CONTROLS:
Briefly press down the little button in the Piccolo® AIR unit (Fig. 3A). The unit sends out
a series of beeps. It is now ready to receive encoding of the first detector.
Release an alarm by activating the detector.
The Piccolo® AIR unit acknowledges by beeping quickly and then stopping the
beeping. Screw the cap back on. The first detector is now activated.
Connect more units
It is possible to connect more detector to the same Piccolo® AIR unit
by repeating the process for the additional detectors.
Connect remote control
Connect optionally remote controls in the same way – just press the
'unlock' button on the remote control instead of demounting the
cap. The remote control is hereby connected to all the alarm units
which the Piccolo® AIR unit controls.
Errors or changes in the settings
Do you wish to change the settings or have you made a mistake along the
way, the Piccolo® AIR unit needs to be reset (see how in the manual of the
Piccolo® AIR unit). Afterwards you have to start all over as described above.
Test that the installation works
Activate a detector without having disconnected the alarm.
Test that the alarm works as described on next page.
PROFORT PICCOLO® AIR
sculptures and other
free-standing objects
infraSpot
climaSpot
activated in
registers
case of change
temperature
in distance to
and
an object.
humidity.
Showcases
inSpot
ultraSpot
Universal unit
activated in
which establishes
case of move-
wireless connection
ment in front
to any kind of
of the unit.
wired detection.
Fig. 3
A
The Piccolo AIR
unit acknow-
ledges with
sound signal.
Advertisement
