Page 1
DVD PLAYER PORTABLE Ref. LDD38-DVBT - USER’S MANUAL - Before connecting, operating or adjusting this product, please read this user’s manual carefully and completely.
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS SAFETY PRECAUTIONS CARACTERISTICS IDENTIFICATION OF CONTROLS SETUP MENU SETTING SETUP MENU INTRODUCTION PARAMETERS AND SPECIFICATIONS BATTERY PARAMETERS...
IMPORTANT SAFETY INSTRUCTIONS Warning: To reduce the risk of electric shock, do not remove the cover or back. There are no user- serviceable parts inside. Refer servicing to qualified personnel. Warning: To prevent fire or electric shock hazard, do not expose the unit to rain or moisture. ...
SAFETY PRECAUTIONS Warning: This digital video disc player employs a laser system. Use of controls, adjustments, or the performance of procedures other than those specified herein may result in hazardous radiation Exposure. Warning: To prevent direct exposure to laser beam, do not open the enclosure. Visible laser radiation when open.
Battery handling and usage There is a CR 2025 battery for remote control. 1) Never throw batteries into a fire. Do not expose batteries to fire or other heat sources. 2) Battery Disposal: Spent or discharged batteries must be properly disposed of and recycled in compliance with all applicable laws.
CARACTERISTICS 7-INCH SWIWEL SCREEN = 180°: THE SCREEN CAN FOLD ON THE MAIN UNIT RESOLUTION: 480X234 DVB-T (DIGITAL VIDEO BROADCASTING-TERRESTRIAL) FUNCTION DVD/MPEG4/VCD/SVCD/CD/JPEG PLAYER USB 2.0 PORT SD/MMC MEMORY CARD SCREEN RATIO: 16:9 OR 4:3 ...
IDENTIFICATION OF CONTROLS Main Unit DVD/DVB OPEN SOURCE Memory Card VOL- / VOL+ ENTER AV OUT ► RIGHT Earphone Socket ▲ UP/CH+ COAXIAL ▼ DOWN/CH- ON/ OFF ◄ LEFT ■ STOP DC IN 9-12V SETUP ANTENNA PLAY/ PAUSE Insert the remote control battery During the 1st use, remove the plastic isolating from the trapdoor to activate the battery.
Remote control unit 1. PLAY/PAUSE Press PLAY/PAUSE once to pause playback, pressing PLAY/ PAUSE second time will resume the playback. 2. STOP When this button is pressed once, the unit records the stopped point, from where the playback will resume, if ENTER is pressed afterwards.
Page 9
12. 0-9 NUMBER BUTTON Selects numbered items in a menu. 13. ENTER Confirms menu selection. 14. VOL + Adjust VOLUME. 15. DISPLAY To display the playtime and status information. 16. AUDIO Press AUDIO repeatedly during playback to hear a different VIDEO language or AUDIO track, if DVD DVB available.
SETUP MENU SETTING System Setup Page Press SETUP button to get the setup menu. Use direction buttons ▲/►/▼/◄ to select the preferred item. After finishing settings, press SETUP again to return to normal display. System Setup TV System Selecting the colour system that corresponds to your TV when AV output.
Language Setup Page Language setup You can select OSD language, and select audio/subtitle/menu language of DVD discs if available. Also you can select font type for some subtitle. Audio Setup Page The function is used to select the SPDIF output: SPDIF off, SPDIF/RAW, SPDIF/ PCM. Video Setup Page You can change the video setting: brightness, contrast, hue, saturation.
Page 12
Speaker Setup Downmix: LT/RT - When playing a 5.1ch DVD disc, the LS/ RS/ Centre channel audio will output through both L and R channel. STEREO - When playing a 5.1ch DVD disc, the LS channel audio will output only through L channel, RS channel audio will output only through R channel, Centre channel audio will output through both L and R channel.
SETUP MENU INTRODUCTION DVB setup menu System Config TV Setting: Selects TV system and TV type. Video Setting: Change the video setting: brightness, contrast, hue, saturation. Language: Selects OSD language. Parent Control: Change password and set channel lock. Default password is 0000. Time Setting: Set time zone.
PARAMETERS AND SPECIFICATIONS Battery Parameters Battery Specifications Output: 7.4V Charge / Discharge Time Standard charge time: 3h ~ 4h Storage and work circumstances 1. Storage circumstances Temperature Humidity 6 months -20°C ~ +45°C 65+20% 1 week -20°C ~ +65°C 65+20% 2.
Page 15
An incorrect positioning can is to damage the apparatus, is to cause escapes on the level of the pile, is to the extreme to cause a fire or the explosion of the pile. - To ensure proper operation, the batteries must be in good condition. In case of abnormality in the functioning of the device, put fresh batteries - Never attempt to recharge non-rechargeable batteries.
Need help?
Do you have a question about the LDD38-DVBT and is the answer not in the manual?
Questions and answers